The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (https://www.fordbarn.com/forum/forumdisplay.php?f=9)
-   -   Safe enclosed car transport starting at $1.00 mile (https://www.fordbarn.com/forum/showthread.php?t=50212)

trulyvintage 10-13-2011 04:28 AM

Safe enclosed car transport starting at $1.25 mile
 
City: Most
State: Lower 48 states
Price: $1.25 up

12 Attachment(s)
Enclosed auto transport is available


My latest available routes are posted on

the last page on the bottom of this thread http://board.moparts.org/ubbthreads/...ins/popcrn.gif


Customer Feedback Here


Check out @ Enclosed Ford Transport

Check out @ Truly Vintage OnDaRoad


MTFCA Member
EFV-8 Member

Please DO NOT post on this Thread


Check the BOTTOM of this Thread on PAGE 10 to see ......
where I am headed next .... http://board.moparts.org/ubbthreads/...lins/drive.gif


Safe enclosed transport for your Ford or other vehicle

Motorcycle - atv - as well ... http://board.moparts.org/ubbthreads/...ins/thumbs.gif


Pickup & delivery in all lower 48 states as
weather & road conditions safely allow


I am not a Broker http://board.moparts.org/ubbthreads/...lins/wiink.gif

Confirmed transport determines where I head next ....


If you own a vehicle & need enclosed transport .... http://board.moparts.org/ubbthreads/...cratchchin.gif

PLEASE PM - EMAIL - CALL ME


The best rate I offer is for coast to coast transport


Most folks want transport in 30 days or less

Check below to see if I have availability along a route
you need hauling .... http://board.moparts.org/ubbthreads/...lins/scope.gif


If not .... http://board.moparts.org/ubbthreads/...ns/shruggy.gif

Unless you want to wait for me to build a trip with connecting loads
to the pickup location and from the drop off location .....

I charge for unloaded miles


Up to 28 feet enclosed space available

Up to 82 inches wide outside tire to outside tire

Up to 88 inch wide vehicle width

Trailer height is 7 feet

Up to 6 ft. 6 inches high vehicles accomodated

Up to 8000 pound capacity

Vehicle must roll freely on good tires that hold air

Vehicle must steer

Loading & unloading on level surfaces only

No extra charge for winching

Soft ties to the axle & frame



Jim
(260) 804-6695



" Living on the road my friend
Was gonna keep you free and clean
Now you wear your skin like iron
Your breath's as hard as kerosene "

http://board.moparts.org/ubbthreads/...lins/drive.gif

trulyvintage 10-13-2011 04:56 AM

This trip is done ....
 

Customer Feedback Here


This trip is done ....


November 7th http://board.moparts.org/ubbthreads/...ns/burnout.gif

I don't get to Florida very much .....


Available to transport from Tallahassee, FL
to just about anywhere in the lower 48 states



Jim
(260) 804-6695

--------------------
" Living on the road my friend
Was gonna keep you free and clean
Now you wear your skin like iron
Your breath's as hard as kerosene "

http://board.moparts.org/ubbthreads/...lins/drive.gif

trulyvintage 10-22-2011 08:00 AM

This trip is done ....
 

Customer Feedback Here


This trip is done ....


November 7th http://board.moparts.org/ubbthreads/...ns/burnout.gif


Available to transport from ..... http://board.moparts.org/ubbthreads/...coffeetime.gif

Savannah, GA and Tallahassee, FL
to just about anywhere in the lower 48 states



Jim
(260) 804-6695

--------------------
" Living on the road my friend
Was gonna keep you free and clean
Now you wear your skin like iron
Your breath's as hard as kerosene "

http://board.moparts.org/ubbthreads/...lins/drive.gif

trulyvintage 10-30-2011 11:19 AM

This trip is done ....
 

Customer Feedback Here


This trip is done ....


November 7th http://board.moparts.org/ubbthreads/...ns/burnout.gif

Enclosed transport available

Up to 28 feet and 8000 pound capacity available

No deposit required

Space is reserved on a first come basis by email or PM confirmation http://board.moparts.org/ubbthreads/...cratchchin.gif

Pick up & drop off must be close along my route

My transport routes are anchored by vehicle transport
I usually will have 8 feet & 3000 pounds minimum
of available space to haul other cargo

Call me to see what is available http://board.moparts.org/ubbthreads/...ins/callme.gif

Vehicle - motorcycle - atv - lawn & garden tractor
Snowblower - welder - generator - equipment
Parts - tires - engine - sheet metal - frame


Starting off in Georgia November 7th


Willacoochee, GA 31650 to Mcrae, AR 72101

My route @ http://mapq.st/v4PQlt


Then ... http://board.moparts.org/ubbthreads/...ins/popcrn.gif


Mcrae, AR 72101 to Battle Creek, MI 49017

My route @ http://mapq.st/rxgr8x


Then ... http://board.moparts.org/ubbthreads/...ins/popcrn.gif


Battle Creek, MI 49017 to Burnsville, MN 55337

My route @ http://mapq.st/uA9HFB


Then ... http://board.moparts.org/ubbthreads/...ins/popcrn.gif


Burnsville, MN 55337 to Norwood, NC 28128

My route @ http://mapq.st/tavK7z


Drive safe ....



Jim
(260) 804-6695

trulyvintage 11-03-2011 01:43 PM

This trip is done ....
 

Customer Feedback Here


This trip is done ....

Shift happens .... http://board.moparts.org/ubbthreads/...s/Snowblow.gif

Looks like I am heading from Georgia to Arkansas
and then Ohio before I go to Michigan ...

Will be going thru or close to:

Atlanta, GA
Birmingham, AL
Tupelo, MS
Memphis, TN
Nashville, TN
Bowling Green, KY

16 feet of room available
5000 pound capacity

Please check my route

My latest route @ http://mapq.st/uTqeE0



Jim
(260) 804-6695

trulyvintage 11-17-2011 08:07 PM

This trip is done ....
 

Customer Feedback Here


This trip is done ....


November 22nd http://board.moparts.org/ubbthreads/...s/Snowblow.gif


28 feet enclosed transport space available
8000 pound capacity

Up the East Coast from Georgia to Massachusetts

My route @ http://mapq.st/u2uJ5S


Happy Thanksgiving http://board.moparts.org/ubbthreads/...s/stuffing.gif



Jim
(260) 804-6695

trulyvintage 11-22-2011 07:29 PM

This trip is done ....
 

Customer Feedback Here


This trip is completed ....

November 22nd http://board.moparts.org/ubbthreads/...s/Snowblow.gif

Long wait .....

Picked up my new enclosed trailer today

New route has me going from Georgia to Indianapolis
then onto Massachusetts

At this time:

13 to 16 feet enclosed transport space available
5000 pound capacity


My route @ http://mapq.st/v6x14w
Happy Thanksgiving http://board.moparts.org/ubbthreads/...s/stuffing.gif



Jim
(260) 804-6695

trulyvintage 12-06-2011 10:11 AM

This trip is done ....
 

1 Attachment(s)
Customer Feedback Here



This trip is done ....

December 6th http://board.moparts.org/ubbthreads/...s/Snowblow.gif

Available for enclosed auto transport
out of the Dayton - Cincinnati area

When the tide goes out - that is .... :rolleyes:


Enclosed parts transport also

Drive safely .... http://board.moparts.org/ubbthreads/.../XMasTruck.gif

trulyvintage 12-27-2011 10:41 AM

This trip is done ....
 

Customer Feedback Here



This trip is done ....


Enclosed transport available .... http://board.moparts.org/ubbthreads/...ins/popcrn.gif

Dayton, OH to Wytheville, Virginia

My route @ http://mapq.st/tfx8Pw


Then ..... http://board.moparts.org/ubbthreads/...ns/burnout.gif


Wytheville, Virginia to DePeere, Wisconsin

My route @ http://mapq.st/siakCS


From Wisconsin I might go to Nebraska or Kansas ... http://board.moparts.org/ubbthreads/...cratchchin.gif

But I can transport to other areas too .... http://board.moparts.org/ubbthreads/...ins/thumbs.gif


Scheduling now ..... ;)


Jim
(260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif

trulyvintage 01-04-2012 10:17 AM

This trip is done ....
 

Customer Feedback Here


This trip is done ....


Available for enclosed vehicle transport - parts too !

Dayton, OH to Bremen, GA .... http://board.moparts.org/ubbthreads/...coffeetime.gif


My route @ http://maps.yahoo.com/#q1=Dayton%2C+OH&a...mvt=m&trf=0



Jim
(260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif

trulyvintage 01-22-2012 08:22 AM

This trip is done ....
 

Customer Feedback Here


This trip is done ....


January 29th http://board.moparts.org/ubbthreads/...coffeetime.gif

28 feet of enclosed transport space available
8000 pound cargo capacity

Leaving Long Beach, California ..... http://board.moparts.org/ubbthreads/...ns/burnout.gif


Headed to one of these areas to pick up
my next scheduled connecting load ...... http://board.moparts.org/ubbthreads/...cratchchin.gif

Manhattan, Kansas
Bremen, Georgia
Leoma, Tennessee
Wytheville, Virginia

Car - truck - motorcycle - atv - ???


Jim
(260) 804-6695

trulyvintage 01-25-2012 04:33 PM

This trip is done ....
 

1 Attachment(s)
Customer Feedback Here


This trip is done ...


January 26th http://board.moparts.org/ubbthreads/...ins/popcrn.gif

Ahead of schedule with about 12 feet of enclosed
transport space available from Albuquerque, NM
west along the I-40 corridor thru Barstow and
then down to Long Beach, CA ..... http://board.moparts.org/ubbthreads/...ns/burnout.gif

I still have 28 feet of enclosed storage space
available headed east from Long Beach, CA .....



Jim
(260) 804-6695

trulyvintage 01-28-2012 02:10 PM

This trip is done ....
 

Customer Feedback Here


This trip is done ....


January 30th http://board.moparts.org/ubbthreads/...ins/popcrn.gif

Enclosed hauling is available from Barstow, CA
to Gardena, CA and continuing to Camarillo, CA

From Camarillo, CA I am headed to New Albany, OH

Here is my route @ http://maps.yahoo.com/#q1=Barstow%2C+CA&...mvt=m&trf=0

I have about 17 feet of enclosed space available
with 5000 pound capacity for this trip ... http://board.moparts.org/ubbthreads/...lins/wiink.gif



Jim
(260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif

trulyvintage 02-03-2012 08:31 PM

This trip is done ....
 

Customer Feedback Here


This trip is done ....


February 4th http://board.moparts.org/ubbthreads/...ins/popcrn.gif

17 feet of enclosed transport space available
5000 pound capacity

Oklahoma City, OK east to Leoma, Tennessee

My route @ http://maps.yahoo.com/#q1=Oklahoma+City%...mvt=m&trf=0



Jim
(260) 804-6695

trulyvintage 02-09-2012 09:55 AM

This trip is done .....
 

Customer Feedback Here


This trip is done ...


February 14th http://board.moparts.org/ubbthreads/...ins/popcrn.gif

Leaving Dayton, OH for Manhattan, KS ...
I have about 10 feet of enclosed trailer space available

I can transport sheet metal - tires - engine .... http://board.moparts.org/ubbthreads/...cratchchin.gif

My route @ http://maps.yahoo.com/#q1=Dayton%2C+OH&a...mvt=m&trf=0

Full from Kansas to Alabama .... http://board.moparts.org/ubbthreads/...coffeetime.gif


February 20th http://board.moparts.org/ubbthreads/...ins/popcrn.gif

Car transport available out of Fairhope, Alabama 36532

28 feet of enclosed transport space available
Up to 10,000 pound capacity


Jim
(260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif

trulyvintage 02-12-2012 10:58 AM

This trip is done .....
 

Customer Feedback Here


This trip is done ...


February 20th http://board.moparts.org/ubbthreads/...ins/popcrn.gif


28 feet of enclosed vehicle transport space available
Up to 10,000 pound capacity

Car - truck - tractor - motorcycle - atv - ?????






Fairhope, AL to ...... http://board.moparts.org/ubbthreads/...cratchchin.gif

San Diego, CA

or

Overton, NE



Jim
(260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif

trulyvintage 02-17-2012 09:30 AM

This trip is done .....
 

Customer Feedback Here


This trip is done ...


February 21st http://board.moparts.org/ubbthreads/...ins/popcrn.gif


Here is my route @ http://maps.yahoo.com/#q1=Fairhope%2C+AL...mvt=m&trf=0


Enclosed vehicle transport available from
Fairhope, Alabama to Bremen, Georgia ....

28 feet of room available .......


Then ..... http://board.moparts.org/ubbthreads/...ns/burnout.gif


Enclosed parts transport available from
Bremen, Georgia to Frederick, Maryland

10 to 12 feet of room available


Then .... http://board.moparts.org/ubbthreads/...ns/burnout.gif


Enclosed vehicle transport available
from Frederick, Maryland to .....

San Diego, California

or ......... http://board.moparts.org/ubbthreads/...cratchchin.gif

Overton, Nebraska

28 feet of enclosed space
Up to 10,000 pound capacity



Jim
(260) 804-6695 http://board.moparts.org/ubbthreads/...coffeetime.gif
__________________

trulyvintage 02-22-2012 12:32 PM

This trip is done .....
 

http://forum.ih8mud.com/attachment.p...1&d=1329927953

Customer Feedback Here



This trip is done ...


February 22nd http://board.moparts.org/ubbthreads/...ins/popcrn.gif


10 to 12 feet enclosed transport space
6000 pound available capacity


Bremen, Georgia up to Frederick, Maryland


My route @ http://maps.yahoo.com/#q1=Bremen%2C+...=5&mvt=m&trf=0



Jim
(260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif

trulyvintage 02-27-2012 09:32 AM

This trip is done .....
 

Customer Feedback Here


This trip is done ...


February 27th http://board.moparts.org/ubbthreads/...coffeetime.gif


28 feet enclosed trailer space is available
8000 pound capacity

Morgan, West Virginia up to Galion, Ohio


February 28th http://board.moparts.org/ubbthreads/...coffeetime.gif


12 feet enclosed trailer space available
4000 pound capacity

Galion, Ohio down to St. Mary's, Georgia

To see my route - click on ' My Route ' below
Then click on ' Get Directions '


My route @ http://maps.yahoo.com/#q1=Morgantown...=6&mvt=m&trf=0



Jim
(260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif




--------------------

trulyvintage 03-01-2012 06:41 PM

This trip is done .....
 

1 Attachment(s)
Customer Feedback Here


This trip is done ...


March 1st http://board.moparts.org/ubbthreads/...coffeetime.gif


Just dropped Richards' 1970 GTO Judge ... ;)

Available for enclosed car transport
28 feet of trailer space
8000 pound capacity


I have scheduled pickups in California and Nebraska

I would like to head there next ... http://board.moparts.org/ubbthreads/...cratchchin.gif

I can go to other states .... http://board.moparts.org/ubbthreads/.../whistling.gif



Jim
(260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif


All times are GMT -5. The time now is 08:35 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.