Panel Delivery Post on Metal Shaping Site Most of you that know me know that I like to hang around some of the sheet metal forums and I have learned a lot from those folks. Several of them have asked me to post info after I got back from the meets and I have done so.
Here is a link to the post that I made: http://allmetalshaping.com/showthread.php?t=6434 If the doesn't get you thru to the site, here is a link directly to the album that I made there. http://allmetalshaping.com/album.php?albumid=98 It is more about sheet metal on the Panel Delivery than the actual restoration work, but some might find it interesting. |
Re: Panel Delivery Post on Metal Shaping Site The site asks for user name & password?????????????
|
Re: Panel Delivery Post on Metal Shaping Site Same here the album requires that we join the Forum to see the pics.
|
Re: Panel Delivery Post on Metal Shaping Site The link to the post with pictures works OK, it's just the album that requires name and password.
|
Re: Panel Delivery Post on Metal Shaping Site Great job with the marvelous work. I saw it at OSH and was very impressed. Now, the big question is what is next? Gar Williams
|
Re: Panel Delivery Post on Metal Shaping Site Sorry about the problem with the links. My password is saved on my cmputer, so it worked when I tested it.
Here is a link to my webpage that has been updated often since I started this project. I am adding more daily as I go back and gather photos from the last several months. I have not done much updating for a while, but am doing so now since the project is completed. http://www.mantiquesresto.com/Projec...PD/dfpd01.html Click on the 'red' colored box at the top of the page to access the restoration section. If you click on the colored 'boxes' on some of the later pages, it will go to a more detailed page. |
All times are GMT -5. The time now is 10:55 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.