engine identification 1 Attachment(s)
I bought this 21 bolt, water pump in block(covered) Heads are numbered as for domed pistons Block has the pictured markings. There is a sticker on the head from a ford approved rebuilder. What year is this block ?
|
Re: engine identification Think it would be very difficult to tell with the information you have posted. Keep in mind that external parts are easily swapped around.
|
Re: engine identification 21 stud pump in block is 37 and most 38 ford
|
Re: engine identification I was hoping the block could be furthur identified by the photo of the block stampings I posted but expect that recast blocks had many different than original Ford stamps. It should have domed pistons but will have to remove the heads to be sure.
|
Re: engine identification 21 stud pump in block engines were exclusive to '37 & '38 cars and trucks, but continued to be produced for service replacement and stationary industrial engines. I have no idea how long they continued to be made.
|
Re: engine identification They were manufactured long time in Canada and the UK. Both before and after the war. Ford casting numbers/letters of the era are largely a mystery about what they represent.
|
All times are GMT -5. The time now is 09:31 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.