40-41 Pickup Front Bumper Braces
 

Are the braces mounted inside the frame, outside or is the frame sandwiched? Thanks.

Re: 40-41 Pickup Front Bumper Braces
 

anybody?

Re: 40-41 Pickup Front Bumper Braces
 

Hello, old relics. First time contributor.... My 41 is sandwiched and the rear is outside. My truck is pretty original and I don't believe it has ever been apart/crashed etc.
Jesse

Re: 40-41 Pickup Front Bumper Braces
 

Thanks! Lets see some pics of your pickup!

Re: 40-41 Pickup Front Bumper Braces
 

Here you go just a few quick pics....it has been in a dry garage since the early 60s in North Dakota had it shipped to MA at the end of last summer. It had the 4 cylinder which I have in storage. I bought a running 46 59ab off of Craig's list for $500 it smokes a bit and has plenty of blowby but runs great. I don't have great big plans for it I just want to drive it as is! Note the regular plates. My theme is: Reliable nostalgia. Most people get it when I drive around town but some people just feel bad for me!
Enjoy, Jesse

Re: 40-41 Pickup Front Bumper Braces
 

Not so easy to load pics here is one Attachment 134503

Re: 40-41 Pickup Front Bumper Braces
 

I think they are too large to do more than one at a time Attachment 134504

Re: 40-41 Pickup Front Bumper Braces
 

One moreAttachment 134505

Re: 40-41 Pickup Front Bumper Braces
 

Very hard to do on an iPad!!!Attachment 134506

Re: 40-41 Pickup Front Bumper Braces
 

Very Nice! I want a 4 cyl model!

Re: 40-41 Pickup Front Bumper Braces
 

The front brackets are on the out side of the frame on the truck in the avatar. It is documented as a '41 but I am certain it's a Heinz 57. It's trimmed out as a '40.

Re: 40-41 Pickup Front Bumper Braces
 

The front braces sandwich the frame.

Re: 40-41 Pickup Front Bumper Braces
 

Thank you Kube. I will fix that when I replace the rubber grommets. The fit did not look right.

Re: 40-41 Pickup Front Bumper Braces
 

Nice old truck.