Unfilling a 1932 Ford Grille 1 Attachment(s)
I picked up a really nice grille shell for my '32 project. Only, it's been filled and I need an unfilled shell. Can I buy the piece to fix it? If so, where?
Thanks! |
Re: Unfilling a 1932 Ford Grille Sent you a PM
|
Re: Unfilling a 1932 Ford Grille I bet you would be better off swapping for one with an opening. Try a wanted ad.
Charlie Stephens |
Re: Unfilling a 1932 Ford Grille you can just drill the screw holes for the trim and cap & bolt them on over the filler part. i've done it - easy!
|
Re: Unfilling a 1932 Ford Grille oops' unless you want to use it to fill the radiator- on mine, i still used the add on filler on the back of the radiator.
|
Re: Unfilling a 1932 Ford Grille The fill might be obvious to undo. if not swap maybe. Depends on what you can do.
|
Re: Unfilling a 1932 Ford Grille There is more than just drilling the hole on top unless they just filled the hole. Many end up reshaping the top of the shell before filling.
Vic |
Re: Unfilling a 1932 Ford Grille I checked my stash and must have sold the piece I cut out of a Vintique stock style shell to fill it. Sorry. Try running an ad on the HAMB for that top piece.
|
Re: Unfilling a 1932 Ford Grille Thanks for the input. Stock, unfilled units just don't seem to pop up that often around here. I'll try for a trade then graft if that won't work. Thanks.
|
All times are GMT -5. The time now is 08:23 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.