Yankee 730 signal wire gauge I am installing signal lights on my 51 F1 truck that I am keeping 6 volt. All the wiring is 14 gauge to the lights but the Yankee signal switch is only 16 gauge wire. Should I solder in new 14 gauge wire into the switch or leave it as 16 gauge. Just wondering if this is a weak link in a 6 volt system. Has anyone done this?
|
Re: Yankee 730 signal wire gauge 1 Attachment(s)
Ford was using 16 gauge on the tail lights but 14 gauge on the brake lights per the manual.
|
Re: Yankee 730 signal wire gauge Quote:
|
Re: Yankee 730 signal wire gauge that will be ok as is don’t take much to light a bulb but takes a lot to turn a starter
|
All times are GMT -5. The time now is 09:55 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.