The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Late V8 (1954+) (https://www.fordbarn.com/forum/forumdisplay.php?f=5)
-   -   I need help identfying this jack (https://www.fordbarn.com/forum/showthread.php?t=283439)

KYBlueOval 07-01-2020 07:47 AM

I need help identfying this jack
 

This jack came with a '57 Ranchero I parted out. I know it is not a jack for a '57Ford of any description........So I'm told. The piece that hooks on to the shaft has stamped into it Front Rear.
The base is 8" X 6"
The "Front" "Rear" stamped piece is 10 3/4" X 2"
The ratchet shaft is 34"
What does it fit?
Thanks in advance
John


I hope these photos are sized where you can easily see them. I've had difficulty in the past getting the size right.



https://i.imgur.com/ftAccXd.jpg?3
https://i.imgur.com/7CLLUGp.jpg?3
https://i.imgur.com/Y7gFPLW.jpg?1

34pickup 07-01-2020 09:22 AM

Re: I need help identfying this jack
 

I don't know but judging from the size of the hook I would say its from a 60s automobile with a wide bumper. The rest of it looks like any typical bumper jack.

KYBlueOval 07-01-2020 01:21 PM

Re: I need help identfying this jack
 

I agree.......the Hook is the key to what it fits. There are two pivot points on the hook, one for the front and one for the rear, as one can see in the photos. I've had friends guess that it is a 60's era Ford jack, but no one has said exactly what year etc.

CrownVic55 07-01-2020 03:59 PM

Re: I need help identfying this jack
 

If memory serves, it looks just like the jack I had for a 68 Galaxy XL
Ben

58Yeoman 07-01-2020 05:09 PM

Re: I need help identfying this jack
 

Just a guess, early 60's T-Bird?

Gene F 07-02-2020 06:38 PM

Re: I need help identfying this jack
 

It looks exactly like the jack I had for my 1972 Monte Carlo, when I was a kid. I think mid 70s Oldsmobiles used them too. I would not bet the farm it's even Ford.

KYBlueOval 07-03-2020 07:00 AM

Re: I need help identfying this jack
 

Thanks Gene..........we'll see if any one else has a thought on what it fits.
John

Fortunateson 07-06-2020 12:41 AM

Re: I need help identfying this jack
 

Looks like the jack in my '69 LTD.

KYBlueOval 07-08-2020 05:47 AM

Re: I need help identfying this jack
 

Could you please take a look at the "Hook" part of the jack you have and see if in fact it has two fulcrum pivot points and is stamped Front and Rear as is the one in my photos.

I would really appreciate it.
John


All times are GMT -5. The time now is 07:01 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.