Blower Motor Resistor - 1968 F100 I have been going absolutely bonkers trying to find a replacement blower motor resistor - I don't understand why this should be such a hard part to find.
I have a 390 with heat and no AC - I've just finished completely rewiring it with a new harness. In that process, we found the blower resister broken and now this is holding us up from finishing. If anyone has a lead on where I can get one or a way to 'rewire' it, it would be greatly appreciated. I've seen posts (can't remember where) that suggested other model Ford blower resistors would work, but can't find them either. Thanks in advance for any direction or suggestions! Rich |
Re: Blower Motor Resistor - 1968 F100 Would this work? Applies to Bronco but Ford extensively used common parts across model lines so it may be the same as used in your F100.
https://northeastclassicfordparts.co...d-bronco-.html |
Re: Blower Motor Resistor - 1968 F100 Quote:
Thanks for the link though! |
Re: Blower Motor Resistor - 1968 F100 a picture will help as to a replacement as other manufactures used a similar way to control motor speeds.someone may make suggestion based on a picture and measurements.
|
Re: Blower Motor Resistor - 1968 F100 Quote:
https://www.autopartsdb.net/assets/i...8317_thumb.JPG I read the Mustang one would work, it has an extra connector for the AC - but can't find those either |
Re: Blower Motor Resistor - 1968 F100 Have you tried these folks? ..."Ford trucks for years 1932 to 1979"
... https://cgfordparts.com/ Always call or contact the parts counter people directly & confirm, don't just look at their online offerings and assume. |
Re: Blower Motor Resistor - 1968 F100 Quote:
Thanks - That's who I tried to order from already - the 68 Mustang blower motor resistor. Out of Stock...:( I will call them; however, and hopefully - they'll be able to help R |
Re: Blower Motor Resistor - 1968 F100 Try these guys, they specialize in n.o.s. Ford parts. http://greensalescompany.com/
|
Re: Blower Motor Resistor - 1968 F100 a picture with measurements will help a ton as most people may not know what you are talking about.but a picture may ring a bell worst case find one that meets the measurements but plug configuration different and use the matching plug if not going for a concourse look.
|
Re: Blower Motor Resistor - 1968 F100 |
All times are GMT -5. The time now is 01:42 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.