generator wiring I am rebuilding a '28 generator and am not sure where the wires go. I have new field coils, a red wire with a terminal fitting and an orange wire with nothing on the end. A wire coming from the cutout relay and a ground wire on the brush plate, trying to figure which wire goes to which brush. It has three brushes with one being a movable brush. Can anyone help me with this?
|
Re: generator wiring You have posted in the wrong section, needs to be in the A forum. Also when you post add a photo of what your working with. The 28 would have come from the factory with a power house generator, which is different than the later normal looking gen, it would have looked more like an alternator.
|
All times are GMT -5. The time now is 03:34 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.