The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model T (1909-1927) (https://www.fordbarn.com/forum/forumdisplay.php?f=2)
-   -   question from a young guy (https://www.fordbarn.com/forum/showthread.php?t=302864)

Youngfordlover2007 08-23-2021 02:25 AM

question from a young guy
 

Note Im not sure if this is allowed but its not a model t related question (it might be)




Now I'm Under 16 and my only source of cash is Christmas and birthday money
I know I'm not gonna be able to afford a model t for a looooooong time
But just wondering about the skill to make a Horseless carriage replica with a lawnmower engine (Note I'm not very mechanically skilled but my dad has loads of tools) I have two choices of what carriage to build! A olds dash replica and also a model t speedster replica (seems harder then the olds )
Just wondering if this is feasible and if any of ya guys have experienced what issues I might be running into and which is easier the olds or the tin lizzie

Youngfordlover2007 08-23-2021 02:25 AM

Re: question from a young guy
 

Mods if ya take this down i understand i wont be salty

ronn 08-23-2021 04:38 AM

Re: question from a young guy
 

first off- take a job- they are paying 18.00 an hour here in NJ-you can work at 14


yes, go with the olds....... they are frequently for sale on ebay for a few thou and easy to copy.


good luck!

Youngfordlover2007 08-23-2021 02:20 PM

Re: question from a young guy
 

Quote:

Originally Posted by ronn (Post 2048834)
first off- take a job- they are paying 18.00 an hour here in NJ-you can work at 14


yes, go with the olds....... they are frequently for sale on ebay for a few thou and easy to copy.


good luck!

Sadly I live in Canada and the minimum age to work is 14 and im 13 And i just live around farms they don't pay that much think (5 usd a hour) so im just waiting till my birthday

McMimmcs 08-23-2021 09:18 PM

Re: question from a young guy
 

We’ve all been there. Dreams bigger than our pocket books.

Youngfordlover2007 08-23-2021 09:46 PM

Re: question from a young guy
 

Quote:

Originally Posted by McMimmcs (Post 2049074)
We’ve all been there. Dreams bigger than our pocket books.

some happy news is that since i enrolled in a metalworking class the teacher maybe could help me fab a chassis but school starts in September so right now im just saving up

McMimmcs 08-24-2021 03:36 AM

Re: question from a young guy
 

Quote:

Originally Posted by Youngfordlover2007 (Post 2049090)
some happy news is that since i enrolled in a metalworking class the teacher maybe could help me fab a chassis but school starts in September so right now im just saving up

Part time and summer jobs for students are easy to come by!

mhsprecher 08-24-2021 06:06 AM

Re: question from a young guy
 

Good luck. Have fun!

ronn 08-24-2021 07:47 AM

Re: question from a young guy
 

https://content.invisioncic.com/r277...f44f71b6a0.png

ronn 08-24-2021 07:48 AM

Re: question from a young guy
 

so that one is in cali..................


rob a bank, talk to your folks or set up a gofundme page...............


you should be able to buy it for 2000.


not worth building one....... a nice project.
ask the seller to store till you can get it................


just an idea.

Two-Gun Bob 08-24-2021 01:04 PM

Re: question from a young guy
 

Since you live in a rural area, ask the farmers if there are old vehicles in the fencerows that you can haul off (with your parents' permission of course!). You might be able to get an interesting project for free or make a trade to do some work in exchange. That's how I got my first Model T parts.

Youngfordlover2007 08-24-2021 02:41 PM

Re: question from a young guy
 

Quote:

Originally Posted by Two-Gun Bob (Post 2049245)
Since you live in a rural area, ask the farmers if there are old vehicles in the fencerows that you can haul off (with your parents' permission of course!). You might be able to get an interesting project for free or make a trade to do some work in exchange. That's how I got my first Model T parts.

parents wont allow it

Ed in Maine 08-24-2021 03:52 PM

Re: question from a young guy
 

Hello, we were all young once, oh those days long ago, I'm 79 now. My first car was a rust free, 1930 Model A Town Sedan which was all disassembled by the previous owner for $300.00. This was purchased in 1964. I was still in college with bills to pay and my Dad was ripped. But three years later this car took me and my new wife away from the church. We never looked back, have had Model A s ever since and now a 1914 Model T. You have to start some place, here are some suggestions:
1. Get some books on how to restore a Model T. Learn about them.
2. Try to join a Model T club nearby. The club members will be pleased with your interest and help you along. You will make new friends who will have the same interest as you. Best of all, they will know where Model T s are located.
3. Study classifieds on the internet. Don't be put off by some of the pricing you will see. There is a lot of Model T parts out there. All you need is a frame to start hanging parts on.
4. If you find something to get started with, you may be able to get your Dad to go look at it. It is a great way to spend time with your Mom or Dad.

Good luck to you. By the way there is a Model T section on the Ford Barn, check in and let them know your interest. Ed

Two-Gun Bob 08-24-2021 05:43 PM

Re: question from a young guy
 

In that case you might just focus on saving up money and use your upcoming class to gain skills that will be helpful when you are able to get a project. The curved-dash Olds project would be a good practice run for an actual antique car, T or otherwise.

Youngfordlover2007 08-25-2021 01:23 AM

Re: question from a young guy
 

Quote:

Originally Posted by Two-Gun Bob (Post 2049340)
In that case you might just focus on saving up money and use your upcoming class to gain skills that will be helpful when you are able to get a project. The curved-dash Olds project would be a good practice run for an actual antique car, T or otherwise.

yea will do

RAJO special 08-26-2021 10:38 AM

Re: question from a young guy
 

Just be patient. Get involved with a local group, you would be surprised what may turn up.
I would suggest building a T, something between 17-25 parts are cheap and easily available. Once you have a running chassis you shouldn't ever have to take a loss. Building a reproduction can be rewarding, but others may not see the value.
Good Luck,
Kevin

15max 08-26-2021 05:16 PM

Re: question from a young guy
 

Go for it. There is a lot of info on the net. What ever you built will add to you skills and interest. That is a fantastic place for your mind to be.
Glad to see your interest.

Youngfordlover2007 08-26-2021 08:43 PM

Re: question from a young guy
 

Quote:

Originally Posted by RAJO special (Post 2049847)
Just be patient. Get involved with a local group, you would be surprised what may turn up.
I would suggest building a T, something between 17-25 parts are cheap and easily available. Once you have a running chassis you shouldn't ever have to take a loss. Building a reproduction can be rewarding, but others may not see the value.
Good Luck,
Kevin

Thanks for the advice

ronn 08-27-2021 06:48 AM

Re: question from a young guy
 

on another note- join MAFCA


they offer scholarships for writing about your exploits with a T. That scholarship can go a long way to your first T or olds or..............


maybe write about your search.

Youngfordlover2007 08-27-2021 05:33 PM

Re: question from a young guy
 

Quote:

Originally Posted by ronn (Post 2050130)
on another note- join MAFCA


they offer scholarships for writing about your exploits with a T. That scholarship can go a long way to your first T or olds or..............


maybe write about your search.

Honestly I'm not good at writing or math or any school stuff ill try but i doubt ill get accepted


All times are GMT -5. The time now is 06:38 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.