36 pivoting ashtray mounting bracket What mounts the pivoting ashtray with the V8 embossing in the 36 waterfall.
I need that piece or an idea of what it looks like, so I can fab one up. |
Re: 36 pivoting ashtray mounting bracket 1 Attachment(s)
The rotating ash tray is 35 it is held to the dash by a semi circular plate screwed to the rear of the ash tray with one screw through the rear of the ash tray frame
|
Re: 36 pivoting ashtray mounting bracket I think I have a complete rotating ashtray assembly in my parts stash, I'll look..
|
Re: 36 pivoting ashtray mounting bracket The '36 dash does not rotate, unlike the '35 version. It is a typical pull down unit with the knob at the top. The retainer bar for the '36 is similar to that shown in Terry's photo for a '35, but the shape is a squared off U shape, not curved, with offset ends. I don't have a photo handy, but surely someone herein does and will share it with us.
|
All times are GMT -5. The time now is 01:41 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.