Brake Shoe Arching LA/San Fernando Valley I had my shoes relined by Valley Friction in North Hollywood. But due to Haz Mat laws they can't arch them. Is the anyone in the San Fernando Valley or Los Angeles area who has a arching grinder?
|
Re: Brake Shoe Arching LA/San Fernando Valley If they measured for the correct linings / thickness then you shouldn't have to.
|
Re: Brake Shoe Arching LA/San Fernando Valley These guys are good and did my work 40+ years ago. Delmers precision brake in Santa Monica. Maybe they could help you out.
|
Re: Brake Shoe Arching LA/San Fernando Valley Quote:
|
Re: Brake Shoe Arching LA/San Fernando Valley They are craiglist and such from time to time. Delco units. Maybe get one and be the goto guy in that area??? Picked up a barrett drum cutter for about 200$. 1.75" chuck. Not that anyone would send you 4 drums across country :).
|
Re: Brake Shoe Arching LA/San Fernando Valley Quote:
|
Re: Brake Shoe Arching LA/San Fernando Valley Are they still in business?
|
Re: Brake Shoe Arching LA/San Fernando Valley Lacy at the Early V8 Garage in West Covina 855 268 0325
|
Re: Brake Shoe Arching LA/San Fernando Valley I just did mine myself using a table belt sander, I took them slowly down until the drum would fit over the shoes, then laid a piece of sandpaper in the drum and sanded the shoe by turning it back and forth until I had a smooth arced surface.
I had the same problem finding someone that offers the service, the brakes work fine. |
Re: Brake Shoe Arching LA/San Fernando Valley Quote:
|
Re: Brake Shoe Arching LA/San Fernando Valley Quote:
|
Re: Brake Shoe Arching LA/San Fernando Valley Quote:
|
Re: Brake Shoe Arching LA/San Fernando Valley Quote:
|
Re: Brake Shoe Arching LA/San Fernando Valley the epa thinks you will die looking at dust from across the street :D
|
Re: Brake Shoe Arching LA/San Fernando Valley TrucParCo in Anaheim turned the drums and arced the shoes to match on my tonner. This was back in 2005. http://truckandautosupply.com/
|
Re: Brake Shoe Arching LA/San Fernando Valley 1 Attachment(s)
I installed a set of Boling Brothers "Lincoln" brakes on the '46 last year, and was disappointed with the performance of the brakes. I pulled the drums after several hundred miles, and saw that the contact area of each shoe was only about 50-60% of the lining length. Old school brake shops are not easy to find to have the shoes arced, so like Sod Buster, I measured and sanded the high spots to get a better contact pattern. I was surprised at the variance in the thickness of the lining material, and they were certainly not arced to fit a 12" drum. So far, the brake effort has improved, but I will pull the drums again at a later date to see how successful my job was.
|
Re: Brake Shoe Arching LA/San Fernando Valley 1 Attachment(s)
I forgot to include the second picture.
|
Re: Brake Shoe Arching LA/San Fernando Valley I just learned this trick. Get a drum that's maybe over .060" and have it turned. Whiz wheel the mounting face off so you just have a ring. You can use the ring to help you gauge contact with the shoes. Give you a could visual of what's going on with the brakes.
|
Re: Brake Shoe Arching LA/San Fernando Valley Sadly Delmers Precision Brakes phone is disconnected.
|
Re: Brake Shoe Arching LA/San Fernando Valley 1 Attachment(s)
51Woodie's second photo.
|
All times are GMT -5. The time now is 04:54 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.