1932 Throttle pedal to bellcrank length What is the correct rod length from the pedal to the bellcrank on a 32 V/8?
|
Re: 1932 Throttle pedal to bellcrank length I measured mine at 9 3/4 inches from center of the pivot balls at each end
|
Re: 1932 Throttle pedal to bellcrank length They measure around 9.7" not installed and 10" installed (measured at the ball opening)
Like stated in the post above |
Re: 1932 Throttle pedal to bellcrank length Got it. Thank You!
|
Re: 1932 Throttle pedal to bellcrank length is this the rod that runs from underneath the dash tunnel down to the pedal? if so, looking for one...
|
All times are GMT -5. The time now is 08:32 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.