The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   6v gen (https://www.fordbarn.com/forum/showthread.php?t=290554)

MyTwOfOrDs 11-22-2020 02:31 PM

6v gen
 

I'm not putting out enough to put decent charge into battery. I'm told regulator can be upped

Will D 11-22-2020 02:38 PM

Re: 6v gen
 

Quote:

Originally Posted by MyTwOfOrDs (Post 1955011)
I'm not putting out enough to put decent charge into battery. I'm told regulator can be upped

Is it a 3 or 2 brush generator? If 3, the third brush can be adjusted to increase or decrease output.

MyTwOfOrDs 11-22-2020 03:35 PM

Re: 6v gen
 

no Doug cant be that lucky. however I think the old boy did brushes, Too much meat for 84 yrs. however still like to turn out a good 1/2 more volt

JSeery 11-22-2020 04:43 PM

Re: 6v gen
 

Can you measure the output? Should be above 6v for sure, somewhere in the 7.2/7.3v range

MyTwOfOrDs 11-22-2020 05:46 PM

Re: 6v gen
 

6.2 to 6.3 max. this regulator spring bending to increase has me

MyTwOfOrDs 11-22-2020 05:47 PM

Re: 6v gen
 

did the field to ground, and zip all

JSeery 11-22-2020 07:10 PM

Re: 6v gen
 

Voltage regulators can be adjusted, BUT, it requires bending components and a very small adjustment can make a big difference.

MyTwOfOrDs 11-22-2020 08:14 PM

Re: 6v gen
 

so whats best way to test gen?

fordwife 11-22-2020 08:48 PM

Re: 6v gen
 

I assume we are talking about a Ford. Get a good repair manual that covers the electrical system and follow the test procedure or find someone who is familiar with Ford systems. I for one would not try to tell you what to do online, except make sure reg is grounded and all connections are clean and tight. Maybe someone else will chime in.


All times are GMT -5. The time now is 12:32 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.