The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   spark plugs 59ab (https://www.fordbarn.com/forum/showthread.php?t=267931)

oldskool 08-15-2019 07:42 AM

spark plugs 59ab
 

what is a good plug for a 59ab edelbrock heads, tube headers, dual holley carbs

big job 08-15-2019 08:35 AM

Re: spark plugs 59ab
 

Motorcraft works for me don't know the number ask Napa

tubman 08-15-2019 08:59 AM

Re: spark plugs 59ab
 

Asking NAPA might not be a good thing to do, because they will probably give you the number of a stock replacement, that will probably be incorrect. Make sure you have the proper thread length. Many aftermarket heads take longer than stock plugs. Stock heads take 3/8" reach plugs (Champion H series), while most after market heads I have seen use 3/4" reach plugs ("L" series Champion plugs). Too short a plug will be "shrouded", while one that is too long will interfere with the exhaust valve, causing a collapsed side electrode at best and engine damage at worst.

Perhaps someone on here has a more precise answer, but the make of plug is a personal choice, the length can be determined by screwing one into a head that's off the engine, but the heat range is best determined by experience. Edmunds heads have the spark plugs relocated so they can use extended tip plugs, but I think they are the only ones that can. resistor plugs are usually unnecessary, and the other variables are again, personal choice.

alanwoodieman 08-15-2019 03:41 PM

Re: spark plugs 59ab
 

autolite 216 and forget the TMK

john in illinois 08-15-2019 05:02 PM

Re: spark plugs 59ab
 

Edelbrock recomends rc12yc or rc14yc champions or equvalent. 14mm, 3/4” reach,flat gasket,5/8 hex extended nose. I like NGK plugs,but others work fine.

John

clo 08-15-2019 07:34 PM

Re: spark plugs 59ab
 

NGK pn# b-4L

john in illinois 08-16-2019 09:26 AM

Re: spark plugs 59ab
 

2 Attachment(s)
Quote:

Originally Posted by clo (Post 1788430)
NGK pn# b-4L

This number is wrong. Only 3/8” reach, need 3/4” For Edelbrock modern heads per the Edelbrock instruction sheet.

Autolite 3924 or Ngk BCP5ES interchange amoung others.

John

PeterC 08-16-2019 09:38 AM

Re: spark plugs 59ab
 

Quote:

Originally Posted by oldskool (Post 1788196)
what is a good plug for a 59ab edelbrock heads, tube headers, dual holley carbs


Just for comparison - I run NGK- B-4L for my 59ab - Navarro heads, Fenton cast headers and dual Stromberg 48's.

Tim Ayers 08-16-2019 10:21 AM

Re: spark plugs 59ab
 

Do what you want, but I wouldn't use Champions. Quality is way down from their glory days.

tubman 08-16-2019 11:00 AM

Re: spark plugs 59ab
 

To be clear, I wasn't recommending Champions, I was just using them as an example, because they were used by Ford in those days. As I said, brand is a matter of personal choice. That being said, I have a set of Champion L82YC plugs in the Edmunds heads on my '51 Merc and they have performed admirably.

Graeme / New Zealand 08-16-2019 03:22 PM

Re: spark plugs 59ab
 

Ngk b6l

gb


All times are GMT -5. The time now is 10:54 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.