Removing lock cylinder from 1934 Ford trunk handle Can key lock cylinder be taken out 34 Ford trunk handle without a key. If so what is the trick, as I am not having any luck. Thanks, Jerry
|
Re: Removing lock cylinder from 1934 Ford trunk handle NO it can't.There is a hole at the edge of the handle and a spring loaded pin(on the lock cyl) in it .The key has to be turned 90 degrees to be able to depress it ,then the lock cyl can be removed.You need a key or someone that can pick the lock.32Phil on this site can assist you.
|
Re: Removing lock cylinder from 1934 Ford trunk handle The cylinder can be drilled out destroying the cylinder, without damage to the handle.
|
Re: Removing lock cylinder from 1934 Ford trunk handle 32Phil has not been on the HAMB since Nov 3. I tried to contact him a month ago and no response. I hope he is OK.
|
Re: Removing lock cylinder from 1934 Ford trunk handle Hi Guys
Thank You for the concern Andy. I made the mistake of buying a new computer..... It's been a wild ride since...... to say the least !!! I will be leaving for Florida in early January sooooo Early Ford Lock & Key service is on hold till April. The good news is everyone's locks/keys etc. have been mailed out. I will still be available for phone questions/help on my cell 845 551 5132. Enjoy the Holidays...……... see ya at the car shows in Florida !!! Phil |
All times are GMT -5. The time now is 05:41 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.