Oil Pump Question I’m rebuilding 2 oil pumps and have noticed several differences. One pump, which I believe is a newer one (according to the service manual) has 4 ribs on the body, a smaller discharge hole and the shield over the screen is held in place by 2 screws. The other pump has a smooth shaft, a larger discharge hole and no screws holding the shield on. In fact, it;s not clear to me how the shield is held in place - was there some sort of clip ??
Many thanks - JIm |
Re: Oil Pump Question There was a thread about the early oil pumps a year or two ago . I think that Steve Plucker started the thread . There was some pics of a few very early oil pumps that I've never seen before . Try a search .
|
Re: Oil Pump Question 2 Attachment(s)
The attached articles may be of help.
Tom Endy |
Re: Oil Pump Question 1 Attachment(s)
Also see attached.
Tom Endy |
Re: Oil Pump Question Hi Tom,
Thanks for posting the oil pan tray info. |
Re: Oil Pump Question thanks everyone for your help and posts.
Jim |
All times are GMT -5. The time now is 05:53 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.