The Ford Barn - running board bolts

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)

- - running board bolts (https://www.fordbarn.com/forum/showthread.php?t=174210)

Drive Shaft Dave

07-24-2015 10:42 PM

running board bolts

What bolts should be used at the front of the running board to the rear of the fender? 30 coupe .early.

Bill Cilker

07-24-2015 11:20 PM

Re: running board bolts

Dave
January through September 1930 - Bolts were 5/16”-18 x 3/4", Bolts heads were 7/16” hex (3/8” hex used on occasion).

Drive Shaft Dave

07-26-2015 10:34 PM

Re: running board bolts

Thanks, Bill.

All times are GMT -5. The time now is 11:59 PM.