1933/34 Ford Running Board Brackets How do you tell the difference between the original and reproduction running board brackets.
Were they marked FORD, or with part # etc. Thanks |
Re: 1933/34 Ford Running Board Brackets The original brackets are made from heavier material. Stan
|
Re: 1933/34 Ford Running Board Brackets The originals were bare of Ford script and part number so no guidance there. Likely the wraparound to create the bolt hole on the end isn't formed as well as on the originals.
|
Re: 1933/34 Ford Running Board Brackets 1 Attachment(s)
My originals are .095 or 13 gauge and have numbers stamped into them.
|
Re: 1933/34 Ford Running Board Brackets Unusual, and the non-zero digit seems to correspond with the Ford part numbers (40-16485, 16486, 16487). My several sets of them have no markings.
|
Re: 1933/34 Ford Running Board Brackets https://www.fordbarn.com/forum/attac...p;d=1608497738
Thanks for the picture showing the Numbers. |
Re: 1933/34 Ford Running Board Brackets 3 Attachment(s)
They are from this car, bought new in Tekeo, Washington. The pair with "70" stamp goes in the rear. Notice the bend in the other pair, they match the curve of the frame. "50"on the right and "60" on the left.
|
All times are GMT -5. The time now is 11:15 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.