60 Ford Pickup Question A friend of mine is making the patch panels to replace the bottom of the doors on a 60 Ford pickup belonging to a customer. The entire bottom of the doors had to be replaced as well as part of the outside door skin. There was not enough of the door bottoms left to tell where any drain holes may have originally been. Can someone tell me what the correct location of the drain holes should be and their shape/size?
|
Re: 60 Ford Pickup Question Songs like it should be replaced with another door.Goodluck
|
Re: 60 Ford Pickup Question The metal fabrication is done and the metalwork is very nice. The doors have no issues at the moment that are not easily dealt with except for the location of the drain hole(s).
|
Re: 60 Ford Pickup Question The holes go just outside of where the rubber goes. From one end to the other. A few extra wont hurt.
|
All times are GMT -5. The time now is 01:01 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.