Helmet tip of the day ..... 1 Attachment(s)
Just a small tip to save ya tons of time when rebuilding the helmet distributor .
Clean up backing point plate , coat with a good prime ( suggest transstar black) then oil the adjusting screws and spin with electric screwdriver assuring they are loose and free. You wont believe how much time this will save ya when setting the distributor up !!!! |
Re: Helmet tip of the day ..... 1 Attachment(s)
the plate and screws
|
All times are GMT -5. The time now is 01:53 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.