1936 Ford 1/2 Ton Pickup Project/Part Out
 

City: Los Molinos

State: California

Price: $4500

Have an old Hot Rod from the 1970"s available, one 1936 Ford 1/2 ton pickup roller, frame is without any rust, has 1938 pickup I beam front end and banjo rear end, grill with stainless is almost perfect, has a little rough hood with hood sides, cab is very straight and solid with only a little rocker rust, I have new replacement rockers included, bed is very rust free with a nice straight tail gate with old chromed hinges, however there are no motor trans, will sell this pickup whole or part completely out........
This would make a great Hot Rod starter for only $4500. as is, I have no title but will supply a filled out California DMV Bill of Sale form using the VIN on the front left frame rail, located 125 miles North of Sacramento on Highway 99, call 530-384-1651 or email [email protected] if interested.........

Re: 1936 Ford 1/2 Ton Pickup Project/Part Out
 

Still have the 1936 pickup roller, SOLD the grill, price is now $3,995. Bump....

Re: 1936 Ford 1/2 Ton Pickup Project/Part Out
 

Lowered Price Again to $2,895.00, Grill Sold! Bed Sold! Have an old Hot Rod from the 1970"s available, one 1936 Ford 1/2 ton pickup roller, frame is without any rust, has 1938 pickup I beam front axle and banjo rear axle, grill with stainless is almost perfect, hood with hood sides are a bit rough, cab is very straight and solid with only a little rocker rust, I have new replacement rockers included, bed is very rust free with a nice straight tail gate with old chrome hinges, steering box column and wheel are included, hydraulic brakes backing plates are included front/rear, hydraulic brake pedal assembly is also included, , Will Sell This Pickup Whole, or Part Completely Out.......Cab with Doors for $1500......Bed with Tail Gate for $1200. (Pending Bill Gozzo).........Steering Column, drop, box, and steering wheel, horn button for $200........Bare Frame for $1000..........Rolling Frame with 1938 front/rear axles, hydraulic brake plates, pedals, and all four wheels for $1500.........
This would make a great Hot Rod starter for only $2895. recently lowered down from $4500. I have no title but will supply a filled out California DMV Bill of Sale form using the VIN on the front left frame rail, located 125 miles North of Sacramento on Highway 99, call or email if interested........ 1935 1936 1938 1939 1940 1941

Re: 1936 Ford 1/2 Ton Pickup Project/Part Out
 

Lowered Price Again to $2,500.00, Grill Sold! Bed Sold! Cab has been switched out for a 1937 1/2 ton cab.....Have an old Hot Rod from the 1970"s available, one 1936 Ford 1/2 ton pickup roller, frame is with one rust hole in the right rear kick up, has 1940 pickup I beam front axle and 1940 banjo rear axle, cab is fairly straight and solid with only some rocker rust , Will Only Sell This Pickup Whole............
This would make a great Hot Rod starter for only $2500. recently lowered down from $4500. I have a clear California title in my name on a non-op registration, matching the VIN on the front left frame rail, located 125 miles North of Sacramento on Highway 99, call or email if interested........ 1935 1936 1938 1939 1940 1941

Re: 1936 Ford 1/2 Ton Pickup Project/Part Out
 

Have the brown 1936 cab on a rust free 1936 pickup frame, very clean front and rear axle assemblies from a restored 1940 coupe.......$3500. pick up here 125 miles North of Sacramento on highway 99, call 530-384-1651 or email me............................... [email protected]

Re: 1936 Ford 1/2 Ton Pickup Project/Part Out
 

We are now down to the rolling chassis, a straight solid 1936 pickup frame with no rust holing $1,000.....I beam front axle assembly complete with hydraulic brakes drum to drum from a restored 1940 coupe $400.... Banjo 4:11 gears rear axle assembly complete drum to drum with hydraulic brakes from the same restored 1940 coupe $600....Four 1950 Mercury wheels W/tires $150..... Three 1936 Ford truck radiators $150. each........Pick up all here 125 miles North of Sacramento on highway 99 East for $2,000.

Re: 1936 Ford 1/2 Ton Pickup Project/Part Out
 

Bare frame is still available for only $700., radiators still available too....Bump...

Re: 1936 Ford 1/2 Ton Pickup Project/Part Out
 

All I have left is a complete 1940 front axle assembly with hydraulic brakes $400., another one that was dropped 3 to 4 inches with no brakes $500., a bare axle beam w/wishbone $125., and 3 radiators $100. each.... Bump...

Re: 1936 Ford 1/2 Ton Pickup Project/Part Out
 

All I have left is a complete 1940 front axle assembly with hydraulic brakes $400., another 1940 axle that was dropped 3 to 4 inches, complete with no brakes $500., a bare 1940 axle beam w/wishbone $125., and 3 radiators $100. each.... Bump...