34 Ford front fender tie I would like to know the proper instllation of the front fender tie?, also air deflector at the bottom of the grill. I have heard that it goes on the top of fenders and also on the back side of fenders? Hope there is a 34 person out there that can help me with this. Thanks Stan
|
Re: 34 Ford front fender tie Maybe this old discussion will help answer your questions on the front end of your 34.
https://www.fordbarn.com/forum/showt...t+fender+panel This one talks about location of the lower splash shield. https://www.fordbarn.com/forum/showt...t+fender+panel |
Re: 34 Ford front fender tie Thanks Zeke for the reply that realy helps , As far as the fender tie what I would like to know is. The fender tie cosist of two parts. One is cast and gets painted and mounts on top of front fenders. The other is stamped steel which goes on the back side of fenders. It is held in place with a bolt & nut that runs horazontel thru the fenders which is what ties the fenders together. my question is does the stamped steel part go in between fenders. or on the outside of the fenders? Thanks Stan
|
Re: 34 Ford front fender tie 1 Attachment(s)
On the outside of the fender flanges as shown below
|
Re: 34 Ford front fender tie David g. Thankyou as they say a picture is worth a THOUSAND WORDS!. Thanks for your help!. Stan
|
Re: 34 Ford front fender tie Quote:
"On the outside of the fender flanges as shown below" - DavidG https://www.fordbarn.com/forum/attac...2&d=1631564071 |
Re: 34 Ford front fender tie https://www.fordbarn.com/forum/attac...p;d=1631567740
https://www.fordbarn.com/forum/attac...p;d=1631567744 1933-1934 Ford Front Fender Tie Clamp. |
Re: 34 Ford front fender tie Trevor,
The fastener on the top was originally a slotted binding head screw, not a hex head screw (bolt), at least in the U.S. |
Re: 34 Ford front fender tie I think that's the Vintique repop in Trevor's pic.
|
All times are GMT -5. The time now is 09:37 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.