The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   Water temperature sending unit (https://www.fordbarn.com/forum/showthread.php?t=266482)

Tom in SW VA 07-17-2019 07:07 PM

Water temperature sending unit
 

Where can I get a water temperature sending unit for a 37 21-stud V-8?

Thanking you in advance.

Tom

paul2748 07-17-2019 07:35 PM

Re: Water temperature sending unit
 

Dennis Carpenter??

Terry,OH 07-17-2019 08:03 PM

Re: Water temperature sending unit
 

1 Attachment(s)
From 35-39 the water temperature is measured by a gauge as part of the gauge is the sending unit, they are one assembly. Photo below is 36 temperature gauge.

v8fordman 07-17-2019 08:14 PM

Re: Water temperature sending unit
 

Terry,OH is correct but a '35 and '36 will not fit your original instrument cluster if you are still using it. '37-'39 are the same but the face is different. I have originals or rebuilt ones by Rudy Faultermeir. I would suggest an original since the fluid in rebuilt ones most likely will fade.

51504bat 07-17-2019 08:22 PM

Re: Water temperature sending unit
 

Williamson's Instruments will put a new bulb on your old gauge.
https://williamsons.com/

deuce lover 07-17-2019 11:31 PM

Re: Water temperature sending unit
 

The Early Ford Store (San Dimas,CA)has several NOS in stock


All times are GMT -5. The time now is 12:38 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.