The Ford Barn

The Ford Barn (
-   Model T (1909-1927) (
-   -   Windshield (

oneofone 03-28-2020 02:10 PM


4 Attachment(s)
I have what I think is a windshield from a 26 or 27 roadster but it seems to be missing the pieces that hold the top of the bottom glass and the bottom of the top glass. I also have four 90* bolts that are only threaded on one end and four levers that are round where they should attach to whatever. So if someone had a pic it would really help since I got this as a basket case. Thanks, j

J Franklin 03-28-2020 02:54 PM

Re: Windshield

The four pieces at the bottom of #1 photo are the parts to hold the glass.

oneofone 03-28-2020 05:36 PM

Re: Windshield

Thanks, Where do they go and how do they attach? TY

oneofone 03-28-2020 05:38 PM

Re: Windshield

Oh, I think I got it figured out. TY again Got any idea where the four bent pieces would go??

redmodelt 03-28-2020 06:58 PM

Re: Windshield

If there are 4 holes like in picture No 2, my bet is they were home made wind wings mounts.

rotorwrench 03-29-2020 08:15 AM

Re: Windshield

They should go in the gap between the upper and lower frames. I have no idea what the bent bolts are for but they may have been part of a home brewed set up.

zzlegend 04-27-2020 08:56 AM

Re: Windshield

2 Attachment(s)
Sorry, but that looks like a possible GM windshield, not a ford. They look similar but a ford lower windshield does not bow up all the way across. Curves up slightly on the ends and then flattens out.

All times are GMT -5. The time now is 12:26 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.