The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Rex Temperature Gauge Fitting (https://www.fordbarn.com/forum/showthread.php?t=254511)

HOTROD_WILLIE 11-09-2018 12:04 PM

Rex Temperature Gauge Fitting
 

1 Attachment(s)
I have old Rex temperature gauge. I need fitting to attach to Model A Ford block. Thanks for the help.

HOTROD_WILLIE 11-09-2018 12:10 PM

Re: Rex Temperature Gauge Fitting
 

1 Attachment(s)
Here is the fitting end.

Flathead 11-09-2018 12:19 PM

Re: Rex Temperature Gauge Fitting
 

Probably could use a Stewart Warner adapter fitting, easier to find at a parts store. Use a radiator hose nipple with a pipe threaded hole.

HOTROD_WILLIE 11-09-2018 12:29 PM

Re: Rex Temperature Gauge Fitting
 

Quote:

Originally Posted by Flathead (Post 1694359)
Probably could use a Stewart Warner adapter fitting, easier to find at a parts store. Use a radiator hose nipple with a pipe threaded hole.

Already try that. Thanks

talwrench 11-09-2018 03:00 PM

Re: Rex Temperature Gauge Fitting
 

If my memory is not failing i think I found the matching fitting at a NAPA store

Chris Haynes 11-09-2018 04:16 PM

Re: Rex Temperature Gauge Fitting
 

Most likely it attaches to a water outlet and not the block. I bout my outlet from Snyder's. https://www.snydersantiqueauto.com/drilled-water-outlet


All times are GMT -5. The time now is 11:56 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.