Enclosed parts transport available - here is where I am headed City:
Most
State:
Lower 48
Price:
0.25 on up
Enclosed parts transport available along
specific routes are posted on this thread http://board.moparts.org/ubbthreads/...ins/popcrn.gif Customer Feedback Here Please DO NOT post on this Thread CHECK the bottom of Page 9 to see where I am headed to next ...... http://www.jalopyjournal.com/forum/a...4&d=1332942801 Sheetmetal - tires - engine - motorcycle - misc Engines - transmissions - differentials must be drained of all fluids and securely fastened to a pallet or a skid which must be loaded and unloaded from my trailer If I have room leftover on specific routes anchored by vehicle transport to haul parts, I will post the available space and route on this Thread .... http://board.moparts.org/ubbthreads/...coffeetime.gif Pick up and drop off must be along my route Jim (260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif |
This trip is done ..... This trip is done
March 28th http://board.moparts.org/ubbthreads/...ins/popcrn.gif 28 feet available space 8000 pound capacity San Jose, CA to San Diego, CA I am leaving in the afternoon and planning on taking the I-5 down .... Continuing to Ohio .... Jim (260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif __________________ |
This trip is done ..... This trip is done
March 29th http://board.moparts.org/ubbthreads/...ins/popcrn.gif 10 feet of space 4000 pound capacity Can be combined with space from San Jose that is available ... San Diego, CA to Springfield, OH My route is posted below Click on the link - then click on ' Get Directions ' @ http://maps.yahoo.com/#q1=San+Diego%...=4&mvt=m&trf=0 Jim (260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif |
This trip is done ..... This trip is done
March 31st http://board.moparts.org/ubbthreads/...coffeetime.gif Available for hauling from Albuquerque, NM to Ohio ..... Jim (260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif |
This trip is done ..... This trip is done
April 5th http://board.moparts.org/ubbthreads/...coffeetime.gif 28 feet enclosed trailer space 8000 pound capacity Dayton, OH to St. Louis, MO Jim (260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif -------------------- |
This trip is done ..... This trip is done
April 7th http://board.moparts.org/ubbthreads/...coffeetime.gif Leaving the St. Louis, MO area for Long Island, NY Stopping in Dayton, OH for a few days ..... Limited room for parts hauling available 10 feet enclosed trailer space 4000 pound capacity My route @ http://maps.yahoo.com/#q1=Waterloo%2...=5&mvt=m&trf=0 Jim (260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif |
This trip is done ..... This trip is done
April 12th http://board.moparts.org/ubbthreads/...coffeetime.gif 10 feet enclosed trailer space available 3000 pound capacity Dayton, Ohio to Syosset, New York Click on ' My Route ' then ' Get Directions ' My Route @ http://maps.yahoo.com/#q1=Dayton%2C+...=6&mvt=m&trf=0 Jim (260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif |
This trip is done ..... This trip is done ... http://board.moparts.org/ubbthreads/...coffeetime.gif
Click on 'My Route' then 'Get Directions' My Route @ http://maps.yahoo.com/#q1=Dayton%2C+...e%2C+NJ++07074 Enclosed transport available .... Dayton, Ohio down to Willacoochie, Georgia Then to Wilmington, North Carolina and New Jersey Up to 28 feet of room available 8000 pound capacity Jim (260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif |
Weather delay - leaving tomorrow Nasty weather delay http://board.moparts.org/ubbthreads/...ins/frowwn.gif
Leaving tomorrow - still have room http://board.moparts.org/ubbthreads/...coffeetime.gif Jim (260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif |
This trip is done ..... This trip is done ...
May 5th http://board.moparts.org/ubbthreads/...coffeetime.gif Dropping off in Tampa, FL .... 10 to 12 feet of enclosed transport space available to Wilmington, NC and New Jersey Planning to head west along I-80 from New Jersey to Omaha, NE ..... http://board.moparts.org/ubbthreads/...cratchchin.gif You could get hauling from Tampa, FL to points along I-80 if that helps ... Making a stop in Wilmington, NC to drop off and pick up Thanks! Jim (260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif |
This trip is done ..... This trip is done ...
May 8th http://board.moparts.org/ubbthreads/...coffeetime.gif Enclosed parts transport available Leaving Tifton, Georgia and headed up to Wilmington, North Carolina ...... http://maps.yahoo.com/#q1=Tifton%2C+...=6&mvt=m&trf=0 Continuing up the East Coast to New Jersey 10 to 12 feet of transport space available 5000 pound capacity Thanks! Jim (260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif |
This trip is done ..... This trip is done ...
May 12th http://board.moparts.org/ubbthreads/...coffeetime.gif Enclosed parts transport available 10 feet of room from Wilmington, NC up the East Coast to New Jersey ..... Passing thru Virginia Beach http://maps.yahoo.com/#q1=Wilmington...=6&mvt=m&trf=0 Thanks, Jim (260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif |
This trip is done ..... This trip is done ...
Virginia Beach Anyone ? http://board.moparts.org/ubbthreads/...ins/callme.gif Great Weather Today .... :) 10 to 12 feet enclosed parts hauling space available Leaving Williamston, NC 27892 right now ... Passing thru Virginia Beach in a few hours .... Headed north to Barnegat, NJ 08005 & Hammonton, NJ 08037 http://board.moparts.org/ubbthreads/...cratchchin.gif Jim (260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif |
This trip is done ..... This trip is done
May 15th http://board.moparts.org/ubbthreads/...coffeetime.gif Limited room to haul parts available I even haul motorcycles ... http://board.moparts.org/ubbthreads/...cratchchin.gif Philadelphia, PA thru Indianapolis, IN to Edina, MO Pick up and Drop off must be along my route @ http://maps.yahoo.com/#q1=Philadelph...=5&mvt=m&trf=0 Jim (260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif __________________ |
This trip is done ..... This trip is done
May 19th http://board.moparts.org/ubbthreads/...coffeetime.gif Parts hauling Parts shipping Enclosed transport available 10 to 12 feet 6000 pound capacity Kansas City, KS to Omaha, NE to Tacoma, WA http://maps.google.com/maps?saddr=Ka...mra=ls&t=m&z=5 Jim (260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif |
This trip is done ..... This trip is done
May 22nd http://board.moparts.org/ubbthreads/...coffeetime.gif Enclosed car transport available Enclosed parts transport available Leaving Grand Island, Nebraska this morning Headed west along I-80 15 feet of enclosed trailer space available 5000 pound capacity I can swing down to pick up in Denver, CO ... http://board.moparts.org/ubbthreads/...cratchchin.gif Call me - I am driving ..... http://board.moparts.org/ubbthreads/...lins/drive.gif Jim (260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif |
This trip is done ..... This trip is done
June 1st http://board.moparts.org/ubbthreads/...coffeetime.gif Leaving Escondido, CA for New Hampshire Taking I-40 west across most of the way to Tennessee Limited room for enclosed parts hauling Pick up and drop off must be along my route Please check my route before you call me ... http://board.moparts.org/ubbthreads/...cratchchin.gif http://maps.google.com/maps?saddr=Es...mra=ls&t=m&z=4 Jim (260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif |
This trip is done ..... This trip is done
June 6th http://board.moparts.org/ubbthreads/...coffeetime.gif Leaving Ft. Smith, Arkansas shortly ... Still have room along I-40 east to I-81 and north to New Hampshire Jim (260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif |
This trip is done ..... This trip is done
June 8th http://board.moparts.org/ubbthreads/...coffeetime.gif Enclosed parts transport available up the I-81 Roanoke, VA to Windham, NH to Whitefield, ME Pick up and drop off must be along my route MY ROUTE HERE Jim (260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif |
This trip is done ..... This trip is done
June 10th http://board.moparts.org/ubbthreads/...coffeetime.gif Pennsylvania to New Hampshire to Maine ..... Then ..... http://board.moparts.org/ubbthreads/...cratchchin.gif Maine to Illinois to Michigan to New York MY ROUTE HERE 10 feet minimum enclosed transport space available 4000 pound capacity Thanks! Jim (260) 804-6695 http://board.moparts.org/ubbthreads/...ns/burnout.gif |
All times are GMT -5. The time now is 01:55 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.