Front Brake Drum Removal from Hub? How do I separate the front wheel hub from the brake drum? Thanks for any advise, unable to find in the book? Jerry
|
Re: Front Brake Drum Removal from Hub? See Vince's site, scroll down and he shows how to remove the swaded
stud and get the drum off. http://www.fordgarage.com/pages/swaging.htm Bob |
Re: Front Brake Drum Removal from Hub? I've never used the tool sold to remove hubs personally. Last time I cut all the studs flush with the drum then used an end mill and just plung cut through them and knocked them out. However, the tool does look easier...
|
Re: Front Brake Drum Removal from Hub? Buy a hole saw for metal..little larger than the stud. Put it in a 1/2" drill and cut down into the swage a bit...hit it with a hammer and she should fall out...at least thats how i did mine.
|
Re: Front Brake Drum Removal from Hub? 5/8 hole saws from Lowe's or Home Depot's online sites worked for me and are cheap! By more than one, as they can disintegrate if used too aggressively!
|
All times are GMT -5. The time now is 10:14 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.