30 Briggs Fordor Seat adjuster I just accumulated an early 30 Briggs 165-D Fordor. Car is in remarkable original condition with original upholstery having been in storage for 50+ years. Found the front seat adjuster mechanism had been removed in its deep dark past. The receiver brackets were on the seat frame but the floor rails were missing, Bert's in Denver (Steve) came up with the floor rails, but I am still missing the adjuster bracket that mounts on the seat frame (it is narrower and mounts different than the one used on the Coupes and later Fordors. Has anyone out there had any experience dealing with this issue. I have been unable to find anything on this particular configuration .. Seems there is no consistency on how these Briggs's bodied were assembled. Finding out I have a lot to learn. Any help appreciated
Thanks Rick Jensen [email protected] |
Re: 30 Briggs Fordor Seat adjuster Rick , check out this link to a 30 Briggs Town Sedan , tear down and restore , many many pic's of everything . May be some help .
https://www.fordmodela.com/restoration/disassembly/ |
All times are GMT -5. The time now is 10:37 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.