How do I back flush early V-8? Have an 8BA in my '36 and would like to back flush cooling system, there are no heater hoses, could I attach garden hose direct to heads and back flush through and out the the radiator fill?
|
Re: How do I back flush early V-8? I would pull lower hose to keep anything from going in radiator.
|
Re: How do I back flush early V-8? Quote:
|
Re: How do I back flush early V-8? Flush everything both ways. Taking off the bottom hose. use a rag around your hose to add some pressure. When you flush the opposite direction from the normal flow you will be surprised at the debris coming out.
|
Re: How do I back flush early V-8? There are some creative ways of cleaning and flushing a radiator on "You Tube".
I would start by disconnecting the hoses and blocking the bottom outlet closed, filling the radiator with vinegar, let it soak (even overnight) then rinse with a water and baking soda mixture will break some of the junk loose. Follow that by flushing it a few times with water. |
Re: How do I back flush early V-8? Right on again Clem...
|
Re: How do I back flush early V-8? I let mine cool before draining water, parked by the swimming pool. Hooked up pool filter discharge to hose connection on head mounted pumps ('36 lb) & blasted it through out the bottom. Also went backward through the radiator. Mice had put pink fiberglass in block.
|
All times are GMT -5. The time now is 10:43 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.