The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   Need dimension of bearing surface axle housing race (https://www.fordbarn.com/forum/showthread.php?t=263589)

Russ/40 05-18-2019 11:17 PM

Need dimension of bearing surface axle housing race
 

The title says it. Anyone that can help me with the housing race dimension or wear limit ?
40 ford

Russ/40 05-19-2019 11:38 PM

Re: Need dimension of bearing surface axle housing race
 

Come on guys someone has the answer. How about a repair sleeve. Can I get an outside dimension?

RobR'35 05-20-2019 01:17 AM

Re: Need dimension of bearing surface axle housing race
 

I've read on here and wrote it down some time ago. Factory 2.061 to 2.063 max. additional wear allowed is minus 5 mils. I don't really get the mils part. I believe it means .005?
Not sure on the wear spec.completely.
I've measured on my car years ago with replaceable sleeves installed before I owned the car. Areas where the bearing didn't ride measured in the spec. I wrote above.

Russ/40 05-20-2019 09:57 AM

Re: Need dimension of bearing surface axle housing race
 

Thank YOU sir!

RobR'35 05-20-2019 01:15 PM

Re: Need dimension of bearing surface axle housing race
 

Your welcome.


All times are GMT -5. The time now is 07:51 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.