Wood floor stiffener hardware I need the hardware to attach the stiffeners to the floor.
Would anybody know the correct size Of the T nuts that were used on 1936. |
Re: Wood floor stiffener hardware The original T nuts were the nail type (only one nail) 1/4-20 thread with countersunk slotted flat top screw that is flush with the bottom of the support wood. There also is a countersunk washer on the floor same as for the floor boards.
|
Re: Wood floor stiffener hardware No hardware other than bolts and T-nuts. Check with whoever took over from Roy Nacewicz. Wasn't that Third Generation Auto. Mike Driskell? (Help an old man out here folks. LOL)
|
Re: Wood floor stiffener hardware 1 Attachment(s)
Yes, The T nuts were 1/4"- 20.
|
All times are GMT -5. The time now is 09:55 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.