|
zenith carb I have a zenith carb that for some reason does not have threads in the secondary well hole to screw the brass secondary well fitting into. Is that a normal carb or is it some kind of mistake?
|
Re: zenith carb Quote:
|
Re: zenith carb https://www.macsautoparts.com/ford_m...dary-well.html
Is this the secondary well pf which you are referring? |
Re: zenith carb Yes that is the part
|
Re: zenith carb You have an early 1928 carb.
|
Re: zenith carb 2 Attachment(s)
Double Venturi Holley Jun 27-Jun 28
|
Re: zenith carb I know nothing about the past on this carb. I came by it when I purchased a basket case model A . It has a single venturi in it now. Do I need a double venturi in it before it will work?
|
Re: zenith carb yur carb wil wrk juz fine with no secondary well and a single venturi . I have one running on my early ccpu engine.
|
Re: zenith carb Look in the intake end of the carb,with the choke open.Are the two jets inline,or offset from one another?If they are inline it is a true double venturi,and if they are offset then it is a single venturi.
|
Re: zenith carb Bill C. is correct, early '28 carb, single venturi. Mine is the same and it's the original.
|
| All times are GMT -5. The time now is 03:56 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.