Lost info on carb breather
 

Sometime in last couple of years, I observed ad selling a very nice new snazzy breather for Stromberg 97 carb. It was chrome with some brass on it. I thought I saved it but must not have. Anyone have any memory of it? I tried to do search with no luck. Thanks

Re: Lost info on carb breather
 

A while ago Bubba of Bubba's Ignition here on the Barn posted some air cleaners that he purchased. Not sure if it was here or on the HAMB. Don't know if that is what you mean by breathers but the ones posted were sweet. IMO

Re: Lost info on carb breather
 

Thanks. That gives me a starting point.

Re: Lost info on carb breather
 

These?

NEW!! Grace & Co. Air Cleaners

- Fit Stromberg 97 and Holley 94
- 4 1/2" Outer Daimeter

Price per pair is $100 for raw steel and $125 for black powdercoat.
$13 Shipping in the US

These are hand made in Winston Salem NC by Grace & Co.

***To order a set contact Chris at [email protected]

See > https://www.jalopyjournal.com/forum/...aners.1039241/
https://www.jalopyjournal.com/forum/...r-jpg.3372647/

https://www.jalopyjournal.com/forum/...2-jpg.3372649/

https://www.jalopyjournal.com/forum/...3-jpg.3372650/


https://www.jalopyjournal.com/forum/...2-jpg.3399811/

Re: Lost info on carb breather
 

Those are super cool pete.

Original 36s are pretty small. Think they work on certain duels.




.

Re: Lost info on carb breather
 

Pete, Thanks, these are the ones I am looking for. Thanks again. Email is on the way to you. Randy

Re: Lost info on carb breather
 

What a beautiful setup, Pete!

Re: Lost info on carb breather
 

Hey, guys....Not my stuff. All I did was to find the original ad for Randy. As seen in my post, Chris is the guy to email for info and to order....