The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   1946 6 cyinder woodie production (https://www.fordbarn.com/forum/showthread.php?t=222757)

Ingram 33vicky 06-15-2017 01:36 PM

1946 6 cyinder woodie production
 

Can anyone provide the number of 1946 woodie station wagons were produced. They should be stamped with 6GA on the upper firewall. Any information or source to look is appreciated. Please email me at [email protected] or phone 541-990-7377.
Thanks, Paul

sawzall 06-16-2017 09:54 AM

Re: 1946 6 cyinder woodie production
 

this book. https://www.amazon.com/Famous-Ford-W.../dp/1580085482

has production data for wagons from about 36 - 51. BUT I dont know that it splits out 6vs 8 cyl?

Bill 06-16-2017 12:41 PM

Re: 1946 6 cyinder woodie production
 

Has anyone ever seen a six cylinder 46/48 wagon? Bill

jagnweiner 06-16-2017 01:36 PM

Re: 1946 6 cyinder woodie production
 

Quote:

Originally Posted by Bill (Post 1486520)
Has anyone ever seen a six cylinder 46/48 wagon? Bill

I'm guessing the OP has . . .

Ingram 33vicky 06-16-2017 01:41 PM

Re: 1946 6 cyinder woodie production
 

I have a 1946 woodie with a 6 cylinder engine. It is stamped on the firewall as a 6GA. Horn placement on passenger side, and battery box on drivers side. I have restored the car and have also found and restored a Columbia with all the proper switches and mounts.

The car was shown at the Bakersfield meet last year and received a Dearborn award. I intend to show it again at the Salem Oregon meet.

Just looking to see if any others surface.

Thanks, Paul

mercman from oz 06-16-2017 06:22 PM

Re: 1946 6 cyinder woodie production
 

https://www.fordbarn.com/forum/attac...p;d=1497655007https://www.fordbarn.com/forum/attac...p;d=1497655007https://www.fordbarn.com/forum/attac...p;d=1497655007
This 1946 Ford Woody was imported from Argentina a few years back. It was originally a 6 cylinder model. Unfortunately, the guy who did the wood work got the wrong slant on the two doors? Unfortunately, I can't help you with a Body Number.


All times are GMT -5. The time now is 01:26 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.