50 shoebox diff Can someone confirm that the pinion setting is set by crush washer or is it set by shims in this diff. Thanks for the help.
|
Re: 50 shoebox diff I believe it is a crush washer or spacer.
if you're replacing a seal just mark the nut to the shaft for reference, If you did not do that then just tighten it and check bearing preload, which I usually do bt feel. Not loose but just some drag. |
All times are GMT -5. The time now is 08:41 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.