It's Friday. We're locked down. Lets watch Mart's video! Hello.
The Crusty Flatty build continues. This is part 21 of the series. Come and join me in the garage as I get the bottom end all buttoned up. Making good progress now. Lets get cracking. https://youtu.be/YXZo5lQOi2E Mart. |
Re: It's Friday. We're locked down. Lets watch Mart's video! Thanks for sharing "Marts Garage" on this gloomy Fri. morning. We need a cupper......
mike |
Re: It's Friday. We're locked down. Lets watch Mart's video! Thanks Mart, I really appreciate your videos!
|
Re: It's Friday. We're locked down. Lets watch Mart's video! Thanka Wamnram. Glad you're enjoying them.
|
Re: It's Friday. We're locked down. Lets watch Mart's video! Mart, you didn't show it, but I assume you put the rope seal in the front cover?
|
Re: It's Friday. We're locked down. Lets watch Mart's video! I didn't show it, but there is a seal in the front cover.
|
Re: It's Friday. We're locked down. Lets watch Mart's video! Thanks Mart, simple but still fun to watch.
|
Re: It's Friday. We're locked down. Lets watch Mart's video! Yep entertaining and informative.
|
Re: It's Friday. We're locked down. Lets watch Mart's video! Appreciate your efforts in making these videos Mart.
They are fun to watch. |
Re: It's Friday. We're locked down. Lets watch Mart's video! Mart was that a Pilot sump? If so would you'd be running a Lucas starter?
By the way love the videos.... your new strap line "hello!" I look forward to them like the updates to the "Project Binky" series on youtube GB |
Re: It's Friday. We're locked down. Lets watch Mart's video! It's a pleasure to see another flathead go together.
Take care Gramps |
Re: It's Friday. We're locked down. Lets watch Mart's video! Thanks guys.
Graeme, the sump pan was ex military stock so probably English and maybe pre-dating Pilot. It should use a lucas starter but I had (some time ago) opened the hole out to suit a USA spec starter. the The French flywheel has the correct tooth count to match the USA spec starter. Something to watch for is that the teeth are cut differently on some French motors. the ones on this flywheel were cut the right way. Thanks Gramps it means a lot to me that you are enjoying seeing it come together. Mart. |
All times are GMT -5. The time now is 01:46 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.