The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Battery Terminal advise please (https://www.fordbarn.com/forum/showthread.php?t=89600)

Ron Lowe 11-21-2012 09:00 AM

Battery Terminal advise please
 

I have noticed after I've tightened one of my battery cables it still isn't tight on the post. I can still move it by hand. Any ideas on maybe using a shim material on the post. The terminal at the end of the cable seems to be in good condition. Thanks Ron

ford3 11-21-2012 10:25 AM

Re: Battery Terminal advise please
 

two choices, remove the clinch bolt and shave the space between the legs on the cable end, that will let the legs to be pulled closer togerthe, or use the shims that can be bought at parts stores that sell batterys, i dont like them, one more place for corrosion to form, there are other things to try but those two are the easiest and quickest, and cheapest

Patrick L. 11-21-2012 10:33 AM

Re: Battery Terminal advise please
 

Like Ford3 says,, its easy to just pinch the terminal and run a hack saw thru it..

Tom Wesenberg 11-21-2012 11:40 AM

Re: Battery Terminal advise please
 

I'm guessing this is on the smaller negative battery post and maybe you have a starter cable NOT from a Model A parts house, so it was intended to fit the larger positive post. I'd buy the correct cable fom one of the Model A parts houses.

If you shim with a strip of copper, brass or lead, then be sure to coat both sides to prevent corrosion.

P.S. 11-21-2012 12:09 PM

Re: Battery Terminal advise please
 

Have you tried using a large socket over the terminal with the clamp on it and gently tapping it down with a hammer? The socket is to get the hammer taps to push the clamp down while not touching the top of the post.

J Franklin 11-21-2012 12:21 PM

Re: Battery Terminal advise please
 

I once had the battery explode due to a loose connector at the terminal when trying to start my (other make) car, It was real exciting. Don't know how it got loose but taught me a lesson.

Ron Lowe 11-21-2012 12:44 PM

Re: Battery Terminal advise please
 

Thanks for the ideas guys. Tom you're right. I purchased both terminal clamps from a local parts store. I'll order the right one after turkey-day.

BILL WILLIAMSON 11-21-2012 03:02 PM

Re: Battery Terminal advise please
 

NO, NO, NO!
Don't EVER hammer on the battery cable!! It will break the seal between the post & the case & acid & fumes will corrode the cable ends!!! It'll look like the crap that grows on 8 month old cottage cheese in the fridge. Mine grew 3 different colors and shapes of stuff!! YUUUUUK! Bill W.

P.S. 11-21-2012 03:13 PM

Re: Battery Terminal advise please
 

I said "tap", not "hammer". BIG difference!

Changing your title to "Assistant gorilla of stuff"...

BILL WILLIAMSON 11-21-2012 05:58 PM

Re: Battery Terminal advise please
 

Quote:

Originally Posted by P.S. (Post 538510)
I said "tap", not "hammer". BIG difference!

Changing your title to "Assistant gorilla of stuff"...

P.S,
Wasn't referring to you, as I noticed you said "TAP," like a TRUE craftsman!:D
I mentioned it in case there were "REAL GORILLAS" out there!:eek: I'm not a GORILLA, I just "MONKEY AROUND WITH STUFF!":D:D:D I just barely qualify to be an "ASSISTANT GURU OF STUFF" Claude's the REAL GURU!:cool: Bill W.

Rusty Homestead Fl 11-21-2012 06:00 PM

Re: Battery Terminal advise please
 

Quote: Mine grew 3 different colors and shapes of stuff!! YUUUUUK!

Bill
The terminal post or the cottage cheese? lol

ford3 11-21-2012 06:02 PM

Re: Battery Terminal advise please
 

LOL BIll, things are never dull when your around

BILL WILLIAMSON 11-21-2012 06:20 PM

Re: Battery Terminal advise please
 

Quote:

Originally Posted by ford3 (Post 538608)
LOL BIll, things are never dull when your around

Thanks, Dude,
Hope I'm not burnin' folks out with my B.S, if I lost my slight sense of humor, I would surely DIE! Can't afford to die as I have bills & taxes to pay!:D Bill W. (Another "UNEXPECTED BILL!):eek:

Gord. B by the bay 11-21-2012 07:44 PM

Re: Battery Terminal advise please
 

Loosen off the clamp a bit drill an 1/8 hole between the clamp and the post then thread in a No. 8 x 1/2" wood screw flush , then tighten the clamp and it will be tight, easier to remove next time Use a Canadian Robertson screw,
Have a Great Day Gord, B by the Bay

Brentwood Bob 11-22-2012 02:28 PM

Re: Battery Terminal advise please
 

replace the clamp. Bob


All times are GMT -5. The time now is 11:52 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.