Rear Main Hi
On the Y block the rear seal is held in place by 2 bolts can you tell me what size they are and what type they are? I have not seen that type of bolt head on any of my other cars Best |
Re: Rear Main they are special bolts.some take a 12 point socket others take an allen wrench.they are 5/16
|
Re: Rear Main thanks Darrell, I'm sure it must be a socket...
Best |
Re: Rear Main I use a 3/8 drive 3/8 12 point deep socket. On reassembly, I use a dab of sealer on the threads because they go in to where oil lives. I also use a dab of sealer on the very end of the seal holder, and the very ends of the parts that press in the grooves.
|
Re: Rear Main i was talking about bolt size but see you wanted socket size.
|
All times are GMT -5. The time now is 11:21 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.