The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Stewart Warner Horn tag source? (https://www.fordbarn.com/forum/showthread.php?t=275563)

DD931 01-18-2020 02:36 PM

Stewart Warner Horn tag source?
 

Does anyone know of a source for a name tag for a Stewart Warner horn? The Sparton ones seem readily available, but I have a Stewart Warner horn. Help!!!

F.M. 01-18-2020 02:41 PM

Re: Stewart Warner Horn tag source?
 

Quote:

Originally Posted by DD931 (Post 1842754)
Does anyone know of a source for a name tag for a Stewart Warner horn? The Sparton ones seem readily available, but I have a Stewart Warner horn. Help!!!

Hi, It does not have a tag like the Sparton & Ames Horn.

DD931 01-18-2020 03:08 PM

Re: Stewart Warner Horn tag source?
 

Makes sense!! Thanks!

rotorwrench 01-18-2020 03:27 PM

Re: Stewart Warner Horn tag source?
 

The model A horns made by EA Labs, Stewart Warner, Ames, GIM, and Sparton. Each manufacture had their own way to identify their products. I think Sparton was the only one to have a tag but one of the others may have but in a different location. The others stamped their ID in varying places on the cover, horn projector, or motor body. There were different ways to adjust them and some had holes in the cover for that and positions of the holes also vary. Not all companies manufactured them during the whole of model A production. The Sparton horns are likely the most common next to SW but some of them may have mixed and matched parts if they are original at all.

Gary Karr 01-18-2020 09:10 PM

Re: Stewart Warner Horn tag source?
 

Ames first generation had a tag on the top of the projector.


All times are GMT -5. The time now is 02:52 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.