The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (https://www.fordbarn.com/forum/forumdisplay.php?f=9)
-   -   51 Mercury Flathead and T5 setup complete (https://www.fordbarn.com/forum/showthread.php?t=263931)

rcnut223 05-26-2019 07:54 AM

51 Mercury Flathead and T5 setup complete
 
City: eau claire
State: wi
Price: 3000

Here is a complete 51 Mercury flathead , borg beck clutch setup and a T5 transmission.

This is a running 51 mercury flathead pulled from a restored 52 mercury (in favor of a small
Block)

I have videos of the engine running. Pan timing cover and rear main seals replaced . I wide belt system has been installed , along with new water pumps and belts. New old stock fan bearing setup installed as well.

The clutch and adapter : flywheel turned , new ring gear installed . All clutch components are new . Flywheel pressure plate throwout and pilot bearings . Nos clutch rod and pin

Adapter is speedway , throwout return spring installed. All have been assembled and tested.

T5 is from an s10 , non world class with geared speedometer. Solid , All has been inspected and new seals installed .


I sold the 32 coupe this was going in, now this has to go. 3500.00 try to find , source parts and a fit this setup. this is what it cost me , and the labor was free.

Please contact me with questions , yes I am negotiable . I prefer not to split.

Try to gather assemble and do this for my asking price .

I will ship world wide

Mike
715-Five 86-zero267

rcnut223 05-26-2019 08:23 AM

Re: 51 Mercury Flathead and T5 setup complete
 

5 Attachment(s)
here are some pictures

rcnut223 06-01-2019 09:27 AM

Re: 51 Mercury Flathead and T5 setup complete
 

bttt price drop

Obo


All times are GMT -5. The time now is 08:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.