The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   columbia 2 speed in model A (https://www.fordbarn.com/forum/showthread.php?t=238850)

kajnhedge 02-08-2018 10:49 AM

columbia 2 speed in model A
 

I'm trying to find out the measurement is for the drive shaft of a Columbia 2 speed rear end into a Model A. I think I have to cut it down about 20 inches to make it fit, Does anyone know the exact measurement?

Jim Brierley 02-08-2018 12:49 PM

Re: columbia 2 speed in model A
 

Don't know the measurement but measure a stock A from the front edge of the bell to the center-line of the axle shafts, and duplicate that on the Colombia.

kajnhedge 02-12-2018 11:11 AM

Re: columbia 2 speed in model A
 

OK thanks, that should work

Jim Brierley 02-12-2018 12:17 PM

Re: columbia 2 speed in model A
 

I've had a Colombia under my wide bed since the late 1950's, and love it. I converted mine to manual shift.

CHuDWah 02-12-2018 06:32 PM

Re: columbia 2 speed in model A
 

Quote:

Originally Posted by Jim Brierley (Post 1592149)
I've had a Colombia under my wide bed since the late 1950's, and love it. I converted mine to manual shift.


Doesn't that make sleeping uncomfortable and doesn't the cartel object? ;)

(Sorry, couldn't resist! :D)

larrys40 02-12-2018 09:04 PM

Re: columbia 2 speed in model A
 

I have a conversion to do down the road with v8 housings already converted. If you have done this before and have experience with it please respond.
Larry Shepard


All times are GMT -5. The time now is 07:33 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.