The Ford Barn - Body Interior Panel Identification

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)

- - Body Interior Panel Identification (https://www.fordbarn.com/forum/showthread.php?t=309012)

BashawT

01-19-2022 11:55 AM

Body Interior Panel Identification

Can anyone identify the name of the part outlined in the attached photo? I am having a bear of a time finding the screws that mount it in place. I also believe that the lower portion was riveted in place.

Thank you!

https://i.postimg.cc/0MDpv9pF/Model-a.jpg

Bob C

01-19-2022 12:59 PM

Re: Body Interior Panel Identification

According to the Body Parts List it looks like the inner quarter panel assembly.

BashawT

01-19-2022 01:29 PM

Re: Body Interior Panel Identification

Thanks Bob, does anyone have any intel on what hardware would be used to fasten?

Tinbasher

01-19-2022 07:07 PM

Re: Body Interior Panel Identification

If I remember there 10-32 or 12-24 machine screws. Run a tap down it will soon tell you.

bobbader

01-19-2022 09:28 PM

Re: Body Interior Panel Identification

10/32 X1/2" flat head machine screws.

BashawT

01-20-2022 10:00 AM

Re: Body Interior Panel Identification

Quote:

Originally Posted by bobbader (Post 2096641)

10/32 X1/2" flat head machine screws.

Thank you!

hazelhoff

01-21-2022 03:43 PM

Re: Body Interior Panel Identification

Rightfully so ! Same screws that hold the ‘thing’ right under the steering wheel to support the two levers …
Not knowing I ended up buying a hole lot of them instead of the right interior mounting kit haha

All times are GMT -5. The time now is 07:33 AM.