The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   32 to 34 spindles (https://www.fordbarn.com/forum/showthread.php?t=275283)

my4dv8 01-12-2020 08:25 PM

32 to 34 spindles
 

Are 32 to 34 spindles interchangeable?
Our LHD 32 has a crack in the steering arm !

Bored&Stroked 01-12-2020 08:40 PM

Re: 32 to 34 spindles
 

To the best of my knowledge the answer is Yes

Charlie Stephens 01-12-2020 09:15 PM

Re: 32 to 34 spindles
 

Short answer, YES. The Green Bible says part B 3105 (Spindle Assy -RH-LHD) fits 32-34 and B 3106 (Spindle Assy -LH-LHD) fits '32-'34.

Charlie Stephens

my4dv8 01-12-2020 09:55 PM

Re: 32 to 34 spindles
 

Thanks guys, that will enable me to widen my search for one.

my4dv8 01-13-2020 06:16 PM

Re: 32 to 34 spindles
 

Found a 34 one in my stash that was RHD , so cut off the drag link arm to make it identical to a LHD RH spindle. And it wasn’t cracked .!!!

V8COOPMAN 01-13-2020 07:00 PM

Re: 32 to 34 spindles
 

Quote:

Originally Posted by my4dv8 (Post 1841007)
Found a 34 one in my stash that was RHD , so cut off the drag link arm to make it identical to a LHD RH spindle. And it wasn’t cracked .!!!


REAL "car guys" just gotta have a stash! DD

jim1932 01-13-2020 07:37 PM

Re: 32 to 34 spindles
 

1 Attachment(s)
Quote:

Originally Posted by V8COOPMAN (Post 1841015)
REAL "car guys" just gotta have a stash! DD

Yep!

Ol' Ron 01-13-2020 07:44 PM

Re: 32 to 34 spindles
 

Not to hi jack this thread, but here goes. If your upgrading an early A or 32/34 vehicle to a more modern rod such a Juce brakes and alittle engine mods. You might want to improve the steering, by using late 35/48 spindles and cross steering. Another sreering box bt Toyota Cellic had the input shaft over the frame and gives exhaust manafold clearance. The Chevy rag jiint fit;s the input and a Ford pitman arm fits the output. This is a vast improvement in driving pleasure. at a small cost.


All times are GMT -5. The time now is 06:27 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.