flatty trans. and bellhousing will a 1953 Victoria flat head transmission and bellhousing hook up to anything after 1953? so as small block fords.
|
Re: flatty trans. and bellhousing transmission will work but the bell housing will not
|
Re: flatty trans. and bellhousing The Fordomatic transmission itself is interchangeable from 1951 clear up into the '60's where the separate bellhousing was used. But the bellhousing from a flathead will not bolt up to any later OHV engines without an adaptor kit (which are probably long extinct by now).
|
All times are GMT -5. The time now is 09:07 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.