The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   ... and the Flathead roared to life (https://www.fordbarn.com/forum/showthread.php?t=73256)

Detroit Flathead 06-04-2012 06:41 PM

... and the Flathead roared to life
 

2 Attachment(s)
I finally assembled and installed everything necessary to start up my 8BA for the first time last night. It was awesome. I bought this engine last summer, and took some of it apart to clean it up and paint it. Now it sits in my 51 Mercury chassis. I replaced the distributor with a Bubba's Chevy conversion unit, a 12 volt Andover coil, 12 volt generator, added Red's Header's, and a Merc-o-matic transmission. You guys might like the third video the most.


Check it out:
https://www.youtube.com/watch?v=ugdIRX5LHuk
https://www.youtube.com/watch?v=UUkf1nJAWiY
https://www.youtube.com/watch?v=C8e_d3LMy-c

Vergil 06-04-2012 06:59 PM

Re: ... and the Flathead roared to life
 

#3 does give you an idea how hot the exhaust is when going through the block heating the water ... nice video, thanks

Vergil

39portlander 06-04-2012 07:08 PM

Re: ... and the Flathead roared to life
 

Nice video, sounds good:D Hope to fire mine up soon.

Strick 06-04-2012 07:32 PM

Re: ... and the Flathead roared to life
 

was that hi-temp paint on the tranny? how did it hold up to the heat from the flames?

52merc 06-04-2012 08:56 PM

Re: ... and the Flathead roared to life
 

is the chevy distributor manual or vacum

BUBBAS IGNITION 06-04-2012 09:13 PM

Re: ... and the Flathead roared to life
 

MAKES A DADDY PROUD !!!!

Is that "Elvis Gold" paint ??? You know theres only two colors allowed in Ky? Elevis gold and Ky chrome ( silver)...
just kidding ya know ..........

felix37 06-04-2012 09:25 PM

Re: ... and the Flathead roared to life
 

Looks and sounds Great!! Good job! can't wait to see the finished product!

Detroit Flathead 06-04-2012 10:09 PM

Re: ... and the Flathead roared to life
 

Thanks guys, I wanted to get a good Flathead video like #3. The flames out of the headers is just cool! The engine paint is a high temp paint, either 1300 or 2000 degrees ( I can't remember at the moment) called Burnt Copper from VHT. The Bubba Chevy conversion distributor is a mechanical advance.

Detroit Flathead 06-04-2012 10:17 PM

Re: ... and the Flathead roared to life
 

To see more of the rest of the car, jump on over to the jalopy journal here:
http://www.jalopyjournal.com/forum/s...d.php?t=641282
It's the link to my build thread, a 1951 Mercury coupe

Gumpy 06-04-2012 11:19 PM

Re: ... and the Flathead roared to life
 

1951 merc my favorite year I owned one in 1980....that was the second flathead i rebuilt....your car is very nice...good luck....gump


All times are GMT -5. The time now is 10:47 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.