Unknown tool ? 2 Attachment(s)
Found this tool in an EV8 parts collection. Anyone know what years it is for ? It looks like a small tire iron with both ends having a slight curl. The square hole maybe for the adjusting nut on early mechanical brakes. Opinions
|
Re: Unknown tool ? how big is the square hole in it? maybe a tire/wheel tool.
My dually inside wheel is held on with square lugs that are threaded on the outside for the outside wheel mounting. It that's it would you sell it? |
Re: Unknown tool ? 1 Attachment(s)
This is the lug wrench for a big truck.
|
Re: Unknown tool ? That looks very similar to the tire iron in my 35 tool kit. The square hole may be for mechanical brake adjustment.
|
Re: Unknown tool ? I could be wrong, but it looks like an after market brake and tire spoon tool. Might be a bit lite for tires.
|
Re: Unknown tool ? That tool is a tire iron for 35/36 that came in the original Ford tool kit. The square hole is to adjust mechanical brakes. It may be for other years as well.
Sent from my iPad using Tapatalk |
Re: Unknown tool ? I meant to give the dimensions. the tool is 11" long, 7/8" wide. The square hole is 1/2" x 1/2". Thank you all.
|
All times are GMT -5. The time now is 02:52 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.