The Ford Barn - Spindle difference

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)

- - Spindle difference (https://www.fordbarn.com/forum/showthread.php?t=198599)

bbrocksr

06-17-2016 07:07 PM

Spindle difference

Is there a difference between early and late spindles on a Model A?
Most of the spindles I've seen are rectangular shaped where the backing plate bolts on. The spindles that came on my early 28 are round backed but other wise the same.
Thanks, Bill

I checked Vinces site first but didn,t see anything on spindles

Tom Wesenberg

06-17-2016 07:28 PM

Re: Spindle difference

You are correct, the early 28 had the round spindles, then they had flat sides for later 28. I'll bet the Service Bulletins might point this out, otherwise the Judging standards must talk about it.

bbrocksr

06-17-2016 10:06 PM

Re: Spindle difference

Quote:

Originally Posted by Tom Wesenberg (Post 1310383)

You are correct, the early 28 had the round spindles, then they had flat sides for later 28. I'll bet the Service Bulletins might point this out, otherwise the Judging standards must talk about it.

Thanks Tom.

All times are GMT -5. The time now is 08:13 AM.