The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   32 intake to Stromberg carburetor adapter? (https://www.fordbarn.com/forum/showthread.php?t=282455)

GSCOV 06-12-2020 05:00 AM

32 intake to Stromberg carburetor adapter?
 

Does anyone make or supply an adapter to keep the Detroit Lubricator intake on an original 32 but use a more reliable Stromberg? Not looking to change out the generator, etc. Thanks

deuce lover 06-12-2020 06:27 AM

Re: 32 intake to Stromberg carburetor adapter?
 

Maybe this?


https://www.ebay.com/itm/1-Thickstun...oAAOSwWAhcUiiG

DavidG 06-12-2020 07:11 AM

Re: 32 intake to Stromberg carburetor adapter?
 

One of those would create a real challenge setting up the choke and throttle controls as the Stromberg carburetor would end up mounted sideways. There could also be complications for the fuel level/float valve.

deuce_roadster 06-12-2020 07:44 AM

Re: 32 intake to Stromberg carburetor adapter?
 

Yes, back in the day they made those. I have one somewhere in my stuff, and I know tomcarmen here on the Barn is running one on a very original 32 5w. Most people just put a 34 manifold on. I will let you know if I find mine, as I KNOW I will never use it. The 2 I have seen don't mount the carb sideways which would be a pain like David said.

donald1950 06-12-2020 08:13 AM

Re: 32 intake to Stromberg carburetor adapter?
 

Secrets on speed has an adapter that moves the orientation 90 degrees

https://www.secretsofspeed.com/carburetor-adapters.htm

Pat/Ohio 06-12-2020 08:30 AM

Re: 32 intake to Stromberg carburetor adapter?
 

I believe you are going to find that the spacing of the two (2) studs on the original '32 intake are different than the spacing on the adapters. I checked with Secrets of Speed about their adapter a year or so ago and found that the adapter they offer wouldn't fit the original intake. Bummer!

I purchased an adapter made by TransDapt that would probably work. It is made to adapt several brands of carbs to several types of single barrel manifolds. I have not installed one yet as I sold the original '32 manifold. You would need the "D" shaped Stromberg base and not the "chevron" style base carb. I would shave the TransDapt adapter to the footprint of the Stromberg base. Just a thought! Good luck.

https://www.jegs.com/i/Trans+Dapt/96...iABEgIJY_D_BwE

Another link to a similar adapter:

https://www.ebay.com/itm/Summit-Raci...ss!45177!US!-1

Stay safe!
Pat

DavidG 06-12-2020 09:09 AM

Re: 32 intake to Stromberg carburetor adapter?
 

Heresy! ;)

Ol' Ron 06-12-2020 03:10 PM

Re: 32 intake to Stromberg carburetor adapter?
 

Why not a 1 bl from a 6cyl???????


All times are GMT -5. The time now is 03:05 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.