The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (https://www.fordbarn.com/forum/forumdisplay.php?f=9)
-   -   1935-1941 Ford Pickup Parts (https://www.fordbarn.com/forum/showthread.php?t=2485)

BrendonSC 05-04-2012 06:38 AM

Re: 1935-1941 Ford Pickup Parts
 
City: Los Molinos
State: Ca.
Price: $250

Sent you a pm about some stuff.

jsteck 07-21-2012 03:31 PM

Re: 1935-1941 Ford Pickup Parts
 

Quote:

Originally Posted by Aircooled1 (Post 12231)
I have early 1935 through 1941 Ford 1/2 ton pickup parts available,from frames cabs fenders & beds to hoods grills & doors,banjo rear axles & transverse spring front axles to 16" wheels & early hydraulic brakes,flathead V8 motors & parts to top loader transmissions & parts,ask and I may possibly have the part you are looking for, EMAIL FOR PICTURES, located 125 miles North of Sacramento on Highway 99, email anderaircooled@aol.com or call 530-384-1651

Hi Aircooled,
I need the following for a 1935 pickup:
1. spare tire mount bracketry
2. metal trim moulding that goes on cab at windshield sides, these are each about a foot long or so.
3. either 3.25 or 3.54 ring and pinion set for stock rear end. must be very good condition, no whiners.

gkgeiger 07-26-2012 01:27 PM

Re: 1935-1941 Ford Pickup Parts
 

I'm looking for a nice pair of wide fives in the 5" width. PM if you have. Thanks,

voblackwood 07-30-2012 08:34 AM

Re: 1935-1941 Ford Pickup Parts
 

I need a complete glove box door and hinge for 36/36 pickup
Vernon Blackwood
281-923-5000

41-steel- 08-18-2012 05:29 PM

Re: 1935-1941 Ford Pickup Parts
 

Hi, after a 40-41 pickup hood and grill if you could help with either, don't matter about condition...reply to dodgerat@hotmail.co.uk thanks

smellycrak 08-24-2012 12:27 AM

Re: 1935-1941 Ford Pickup Parts
 

Hi There

Would you have any door hinges I need 2 left hand side and 2 right hand side, if so how much and would you USPS them to Brisbane Australia?
many thanks kenny

smellycrak 08-27-2012 07:22 PM

Re: 1935-1941 Ford Pickup Parts
 

hi there

how much do you want for full set of 36 pickup hinges?
and will you post them to brisbane australia?

thanks kenny

racer2378 08-28-2012 05:47 PM

Re: 1935-1941 Ford Pickup Parts
 

do you have a set of 35-36 ford front fenders? any condition. thanks

Ray Balukas 08-29-2012 07:03 PM

Re: 1935-1941 Ford Pickup Parts
 

need a 37 pu right inner front fender well

hoss50 09-15-2012 11:34 PM

Re: 1935-1941 Ford Pickup Parts
 

hey Aircooled, I need a pair of steel front fenders & also a pair of steel rear fenders & steel running boards for 35-36 Ford pickup. Have any good ones ? If so, how many pair? My email is bw3467@gmail.com thanks!

the cooch 09-18-2012 11:28 AM

Re: 1935-1941 Ford Pickup Parts
 

Hi! The '36 pickup seems to have a small panel between the rear fender-bed-running boards. I assume these are usually lost or damaged on old trucks but if you have some that are really rough they will work great on the "as is" driver. Thanks and way to go, keepin' the pickups rolling! P.S. I'm also interested in a specific flathead block from early pickups to rebuild. Thanks!

DetroitMotion 09-24-2012 08:36 PM

Re: 1935-1941 Ford Pickup Parts
 

Any leads on 38-39 one-ton fenders or running boards?

dfran12146 10-04-2012 10:58 AM

Re: 1935-1941 Ford Pickup Parts
 

looking for 41 pickup frame....

70cougar 11-09-2012 09:40 AM

Re: 1935-1941 Ford Pickup Parts
 

How about a 37 windshield frame ?

randeyc 11-15-2012 12:31 AM

Re: 1935-1941 Ford Pickup Parts
 

In need of the upper and lower radiator splash pan. Let me know if you have one.

randeyc 11-15-2012 12:33 AM

Re: 1935-1941 Ford Pickup Parts
 

In need of the upper and lower radiator splash pan. Let me know if you have one. Forgot to add for a 37 pickup

Roadster5040 11-25-2012 08:13 AM

Re: 1935-1941 Ford Pickup Parts
 

Looking for 35-36 pickup truck column drop complete with key 713-826-2582 Tim

KARNUTS 12-01-2012 06:39 PM

Re: 1935-1941 Ford Pickup Parts
 

I have a rare 41 ford pickup radiator from the n series flat head 4 cylinder if your interested or have people looking for one
Jeff
jeffshotrods@alliancecom.net

borcutt 12-11-2012 09:17 PM

Re: 1935-1941 Ford Pickup Parts
 

sent you an email about a grille.

russtford 12-25-2012 11:06 AM

Re: 1935-1941 Ford Pickup Parts
 

Need front fenders for 35 pickup. Also grill, any front sheet metal.


All times are GMT -5. The time now is 10:25 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.